Years ago I read an article on how some of the old cases can be bought back alive putting a rim on a rimless case and then re working them.
Well it took me all day and attempt number five.
I made one.
It is for my 7.62x33r which is a necked down 357 mag case to 30 cal.
Rimmed 300 blk short thing
Which was a wild cat that the whisper was based on.
So if I can pick up some 300 blk cases I could put a rim on them and shorten them 70 thou.
Or use 357 max cases or 223R cases.
The case I used is a 223 range pick up.
Fire formed and neck turned so the thick brass can hold a boolit.
Why.
Well because I wanted too see if I could.
Any one else put rims on rimless cases?
Thnx
Bruce