I have a single stage loader with lots of parts to change to different calibers. It's set-up for 12ga now.
I don't reload for shotgun so I really don't know anything about these.
What would it be worth?????
I have a single stage loader with lots of parts to change to different calibers. It's set-up for 12ga now.
I don't reload for shotgun so I really don't know anything about these.
What would it be worth?????
Single-stage? I've never seen a "single stage" Ponsness-Warren reloading press other than their .50 BMG rig and all their currently catalogued shotshell loaders are progressives. Got a pic or two?
Just as a matter of info, for the last month, an old sporting clays acquaintance has been offering a (barely) used P-W 950 Elite with a full set of shot and powder bushings for $500 without so much as a nibble.
Bill
"I'm not often right but I've never been wrong."
Jimmy Buffett
"Scarlet Begonias"
Maybe I'm using the wrong term.
It's not a progressive. It loads one shell at a time. That's what I was told anyway.
I'll see if I can remember how get a photo up. I've done it before. A long time ago.
If its the shot shell reloader its the P W 375. Can hold 2 gauges at one time just a couple of minutes to change from one gauge to another. They quit making them a couple of years ago. I have one in 12 and 20 gauge. The prices range from 100 to 300 bucks
Jerry
I have a PDF copy of the manual if you need one.
Arclight
I hope this works.
Last edited by abunaitoo; 11-15-2011 at 02:52 PM.
I've checked on the web for what it's worth.
Anyware from $180.00 to $350.00.
The one I have has a bunch of bushings, and I think two die sets.
I have an old P/W 800B that I havent used in a good while Anyone interested?
That's a nice press, I have one in 12 ga. and it makes good shot shells.
From the pictues it looks like you are set up for 12 and 20 gage, plus a bunch of of powder and perhaps shot bushings and replacement wad fingers.
Wish yours had been avalibable, when I bought mine, used.
NRA Endowment Life Member
the 375 is the best single stage loader ever made. I use mine to make buckshot and slug loads.
Is your 375 still available? jim smith
First to Jim Smith. I still have it, but have someone who is interested in it. We're trying to work out the details. If he dosen't pick it up, I'll post it for sale.
Now for the question I had.
I was trying to see what size the dies were for this loader. None of the dies parts had any markings on them.
Are they suppose to be marked?????
If not, how would I tell what gauge I have.
I don't reload for shotgun. Don't know much about shotguns. I have a Mossberg 500 for "just in case".
Thanks abunaitoo. I can pay cash or I have lots of goodies to trade, such as; powder measures, lyman lubrisizers, sizer dies, Lyman Tru-line jr. and All American presses, RCBS-rk-ckr, and parts galore. Lots of stuff. jim smith
I think I have three different gauges.
I attached a picture of the shell holders. Hope it comes out.
I put a quater in the picture for size comparison.
I hope someone can tell me what I have.
Last edited by abunaitoo; 11-15-2011 at 02:52 PM.
I'm looking to sell this press.
Looked through the web and found they run from $180, for a junker, to $350 for one in the same condition as the one I have.
I'm thinking $350, with all the extra's, is a fair price.
Any comments?????
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |