Well, hunting season is about over for my son and I down here in South Louisiana and it has been a success. I have shot 2 deer with the rifles we bought during the summer and my son has had the chance to shoot at 6 deer but unfortunately he missed all 6 times due to the ranges the deer were at. Part of him missing is that he did not get much trigger time on his rifle for many different reasons. What I am wanting to do now is find a good cast bullet for his gun so that I get him on the trigger plenty this summer. 1 member (whom I do not remember) sent me some rounds loaded with a flat tip lead bullet that would not chamber in either of my 2 rifles and when I seated the bullets deep enough to chamber, the bullet just feel in the case. So I would like some other recommendations for a cast bullet mold and below is what I can do with it.
Caliber 7mm-08
Lube - I have a Star luber and I also coat my pistol bullets with Red Copper Hytek coating.
Powders - in my area I can get IMR 4895, Imr 4350 and H380 routinely. I have all 3 on hand. There is no Accurate or Allaint powders to be seen in my area. I also have Ramshot Sillouhette, 231 and Titegroup available.