I am getting ready to work up some loads for my Garands and my old 03A3. In years past I always used H4895 but that is very hard to find anymore and also very expensive when you do find it. So, I am working with 3031, 4198, Buffalo Rifle, BL-C2. I have found that the 3031 is much more accurate than the BL-C2 in .223 so I am thinking it probably will also be better in 30-06 since the last load I tried with it in 06 did not impress me. Molds I have on hand are 311359, (too light) 311291, 311466, 311416,308241 and one I just got which is an old original but never used HM2 311-160-5.
I am open to suggestions as to what you guys are using. I am not really interested in buying anymore molds at this point since I have more than I can use now including pistol molds. Powder is maxed out also due to storage space. So would like to work with what I have.