Title says it all. I'v been trying various search criteria to find home grown formulas for swage lube. Please share yours with a noob swager. I'm New to this part of bullet making. Have my press and still waiting on dies. Need some lube recieies.
Title says it all. I'v been trying various search criteria to find home grown formulas for swage lube. Please share yours with a noob swager. I'm New to this part of bullet making. Have my press and still waiting on dies. Need some lube recieies.
"Investment" is the new "Throw money at it!"
Detectives, and Cobras, and Agents!
Oh my!
A lot of good info here http://www.castboolits.gunloads.com/...hlight=lanolin
Quick and easy 50/50 Anhydrous lanolin and castor oil . Done !
I use 50/50 Vaseline and Anhydrous lanolin. Just put equal parts in a microwaveable container, heat untill it liquifies, and stir. I put mine in a large in a large syringe I get from Tractor Supply for vetenary use. It makes dispensing and storage a snap.
Blazer's formula works as well and is what I started with.
Anhydrous lanolin and castor oil. Mix in castor oil to get consistancy you want. I went with 1lb lanolin to 4 oz castor oil. Probably equaled a 80-20 mix. I don't think you can get it wrong whatever mixture you use with these two ingredients.
BT
BTX Star Crimp Die
Back in stock with new low price!
Click link below!
http://castboolits.gunloads.com/show...Star-Crimp-Die
also check in and say hello on my new face book page!
https://www.facebook.com/BTSniper-153949954674572/
I just sugested 50/50 because that is what Dave Corbin's mix is suposed to be and it woks for me . And countless others !
80/20
Anhydrous lanolin / neatsfoot oil
I started with 50/50 by that was too thin, I had ejection issues.
Thanks very much guys. Where do you buy Lanolin? Drugstore? Farm & Home type stores?
"Investment" is the new "Throw money at it!"
Detectives, and Cobras, and Agents!
Oh my!
Hate to break it to you guys there are no Hero's in making Jacket Lube for Bullet making. As you see most lubes are lanolin based. My mix is 3 parts anhydrous lanoline 1 part vaseline. Heat together and store in film containers till needed. 8 oz of lube will last a couple lifetimes.
I make a minimum of 500 bullets at a time. I use a gallon mason jar to roll my jackets with lube. Minimum lube is a good way to go. Weigh wax paper square 1 in x 1in with lube added and either wipe the inside of the jar with the lube all four sides and the lid or if you use a tumbler throw the wax paper and lube in and let it go. For the jar I will roll the jar for 15-20 minutes. For the tumbler do what you feel is right.
Stephen Perry
Angeles BR
Al is not going to turn rancid overnight , But on the advice of my pharmacist who used to sell small bottles of lanolin to highscool musicians for cork grease on wind instruments , and it was he that advised me of the perishable part . So yes in my opinion a cool basement should do just fine . And if by chance the jar starts to get a funky oudor it means your not swaging enough bullets fast enough !!!
How does the rancidity (is that a word?) affect the lubricity? Or does it just smell bad but work fine for our uses?
Good point Sarge, also, could we get a scale of stinkyness?
Like say, better or worse than gear oil?
All I have ever used is 10w30 synthetic motor oil 1 quart lasts a lifetime
I have a one pound jar of anhydrous lanolin I have just kept in a cool place since 1990 and it works fine as far as lubricity goes. I suppose the warning for the rancidity is for sax, oboe, clarinet, and bassoon players who have their noses an inch away from the lanolin on the cork mouthpiece gasket in their instruments. Lanolin gets a stiff oxidized layer on top but even that still works okay as a lube for high pressure applications, in fact when I first started reloading, my buddy had some lanolin that was thirty years old and it worked okay. The rancid smell it gets isn't all that rancid to me, it smells like an old sheep barn is all and I kind of like it because it reminds me of when I worked for one of the last sheep men in Southern California delivering water to his sheep camps.
rl903
~+:/&\:+~+:/&\:+~+:/&\:+~+:/&\:+~+:/&\:+~+:/&\:+~+:/&\:+~+:/&\:+~+:/&\:+
There is no such thing as too many tools, especially when it comes to casting and reloading.
Howard Hughes said: "He who has the tools rules".
Safe casting and shooting!
Linstrum, member F.O.B.C. (Fraternal Order of Boolit Casters), Shooters.com alumnus, and original alloutdoors.com survivor.
STP works great for sizing and swaging!
Get the lanolin and anything else that you need for home made lubes, from Castboolit's own RandyRat:
BEESWAX- LANOLIN- CARNAUBA WAX
CLICK ON THE LINKS BELOW FOR PRICING AND INFO
PM RandyRat andhe will give you the ordering/billing info
CARNAUBA WAX= http://castboolits.gunloads.com/showthread.php?t=100177
LANOLIN=http://castboolits.gunloads.com/showthread.php?t=96820
BEESWAX=http://castboolits.gunloads.com/showthread.php?t=86774
Added Stearic Acid to the lineup this week PM RandyRat for details
NRA Life Member
NRA Certified Metallic Cartridge Reloading Instructor
Author of a book on reloading
ILSA MEMBER http://www.internationallawnsteelsho...ssociation.com
NRA RANGE SAFETY OFFICER
I use frog snot from Alaska
"Life isn't like a box of chocolates...It's more like
a jar of jalapenos. What you do today, might burn
your ass tomorrow."
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |