An old friend of mine has a Remington model 4 that was his Dad's and would
like to have a few shells for it-even if it's only 2 or 3. Anyone have any laying
around or know where some are at ? It's a .32 Rimfire ctg.
Thanks Very Much
An old friend of mine has a Remington model 4 that was his Dad's and would
like to have a few shells for it-even if it's only 2 or 3. Anyone have any laying
around or know where some are at ? It's a .32 Rimfire ctg.
Thanks Very Much
Try Old Wester Scrounger
Gunbroker also has small lots from time to time as well, but be prepared, the shells sell for $1.50-$2 each in boxes, singles will be more.
Also make sure if he's going to shoot it to have it checked out, it's not a strong cartridge, but they did tend to shoot loose, especially the Take-down versions.
Neat little guns though, I'm working on converting one to CF and either 32 S&W or 32 S&W long (loaded lightly) I just wish mine had a decent barrel on it
Nozombies.com Practical Zombie Survival
Collecting .32 molds. Please let me know if you have one you don't need, cause I might "need" it!
NoZombies- you can get a liner for 32-20 that will work fine for the 32 S&W.
I made a Crescent RB into a 32 S&W using a 308 barrel and it shot fine. It was a solid frame and the same size as the Rem. #4
John Taylor:
I've looked at the liners, but I'm thinking I might just get one of the wilson air-gauged barrels, and fit that, seems like by the time I'm done, it'll be about the same money, and probably as good, or better a shooter.
Maybe next year... way too many projects going right now!
Nozombies.com Practical Zombie Survival
Collecting .32 molds. Please let me know if you have one you don't need, cause I might "need" it!
My .32 solid-frame Remmy #4 roller only had the FP converted to CF for me to be able to shoot commercial .32 Short Colt ammo (currently made by Winchester) in it.
It made an impressive small game rifle/woodswalker.
.
Now I lay me down to sleep
A gun beside me is what I keep
If I awake, and you're inside
The coroner's van is your next ride
The problem with the #4 is the thin action. A proper looking barrel has to have a breech end only a little over 3/4" wide. Green Mtn makes a suitable replacement.
My #4 is converted to 32 S+W long. The FP is a fairly easy change and the bore (about .310) was good with .311/12 boolits. I wouldn't try lining one unless it was shot. And make sure you use a piloted drill and some care. I hurried and ruined my barrel. The liners are .500 OD and you use a 13MM drill bit. That leaves a very thin barrel, very, very thin.
Not a 32rf, but a 22. Here is mine with a Green Mtn barrel. Good barrels. This one will do half inch 50yd groups
SS
NRA Life Member Since 1981
"The very atmosphere of firearms anywhere and everywhere restrains evil interference - they deserve a place of honor with all that's good"-- George Washington
II Corinthians 4:8-9. We are hard-pressed on every side, yet not crushed; we are perplexed, but not in despair; persecuted but not forsaken, struck down, but not destroyed."
Psalms 25:2 O my God, I trust in thee: let me not be ashamed, let not mine enemies triumph over me.
[SIGPIC][/SIGPIC]
I need to know more about that Green Mt. barrel. More details please.
I need to replace a barrel on my 32.
Dan
Here is the 22lr barrel I used.
http://www.gmriflebarrel.com/product...aspx?id=324011
and here is one for the 32-40 not rimfire sorry.
http://www.gmriflebarrel.com/product...aspx?id=323948
They seem to be good barrels. As I said mine is a shooter.
SS
NRA Life Member Since 1981
"The very atmosphere of firearms anywhere and everywhere restrains evil interference - they deserve a place of honor with all that's good"-- George Washington
II Corinthians 4:8-9. We are hard-pressed on every side, yet not crushed; we are perplexed, but not in despair; persecuted but not forsaken, struck down, but not destroyed."
Psalms 25:2 O my God, I trust in thee: let me not be ashamed, let not mine enemies triumph over me.
[SIGPIC][/SIGPIC]
Bullshop
liners http://www.trackofthewolf.com/%28S%2...42&styleID=483
32-20 barrels http://www.trackofthewolf.com/%28S%2...2&styleID=1239
I have dealt with TOW many times and they are good to deal with
pm me i have some 32 long rimfire.
Here's a cheaper option for the green mountain barrel:
http://www.midwayusa.com/viewProduct...tnumber=491891
I'll be getting one when I place my next order with them or Numrich, as the prices are within $2-3 so it'll depend on which one I order from next...
Nozombies.com Practical Zombie Survival
Collecting .32 molds. Please let me know if you have one you don't need, cause I might "need" it!
No Zom- Why? A few more dollars and you can get a proper octagon barrel that'll look right. That tube hanging off a #4 will look goofy.
Here's the ones I was speaking of- http://www.gmriflebarrel.com/catalog...terfirebarrels
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |