Reloading EverythingTitan ReloadingMidSouth Shooters SupplyLee Precision
RotoMetals2

Donation Goal 
Donate Now Goal amount for this year: 4000 USD, Received: 0 USD (0%)
Our Annual server fund drive is going on now! This donation drive helps fund Cast Boolits for an entire year, and helps support our 2nd amendment rights! You can donate by Paypal by clicking the DONATE button. Or by Cash / Check / MO to the address below:

Willy Snyder
PO Box 2732
Pocatello, ID 83206


Results 1 to 10 of 10

Thread: is this possible?

  1. 07-30-2009, 09:02 PM #1
    canuck4570
    canuck4570 is offline
    Boolit Master
    Join Date
    Jul 2005
    Location
    Ile bizard near Montreal
    Posts
    871

    is this possible?

    well yes it is

    A few weeks ago I asked it this was possible to take the pin of a lube seizer die and have it countersink so the shank of a gaz check bullet would fit in and while lubing would prevent the lube from lubing the portion of the gaz check bullet.
    My son machined me such a pin a it works beautifully
    lube some 150 bullet and no problem
    a picture is worth a thousand words[IMG][/IMG]
    the wall of the pin are .010 thousand and surprisingly solid ( same as a gaz check itself even harder since the pin is steel[IMG][/IMG]
    here is a picture of a bullet has it is seating on the pin before going in the seizer die
    [IMG][/IMG]
    here are some bullet has they come out of the seizer die et "voila" no lube on the skank
    so now when I want gaz check bullet I use the solid pin and when I wish no gaz check and no lube I use the cutersink pin
    My hope is that Buck shot would offer this service to you all casters I would be honered...
    Canuck
    Last edited by canuck4570; 07-30-2009 at 09:21 PM.
    Reply With Quote Reply With Quote
  2. 07-31-2009, 01:41 AM #2
    Buckshot
    Buckshot is offline
    Super Moderator




    Buckshot's Avatar
    Join Date
    Mar 2005
    Location
    So. California
    Posts
    11,835
    ...........Well, there you have it, it DOES work Looks like some good work too.

    ................Buckshot
    Father Grand Caster watches over you my brother. Go now and pour yourself a hot one. May the Sacred Silver Stream be with you always

    Proud former Shooters.Com Cast Bullet alumnus and plank owner.

    "The Republic can survive a Barack Obama, who is, after all, merely a fool. It is less likely to survive a multitude of fools such as those who made him their president."

    Shrink the State End the Fed Balance the budget Make a profit Leave an inheritance
    Reply With Quote Reply With Quote
  3. 07-31-2009, 06:36 AM #3
    mrbill2
    mrbill2 is offline
    Boolit Buddy mrbill2's Avatar
    Join Date
    Oct 2008
    Location
    Pa.
    Posts
    399
    You can do the samething for bevel base bullets.
    Mr. Bill2
    Reply With Quote Reply With Quote
  4. 07-31-2009, 09:06 AM #4
    canuck4570
    canuck4570 is offline
    Boolit Master
    Join Date
    Jul 2005
    Location
    Ile bizard near Montreal
    Posts
    871
    Quote Originally Posted by Buckshot View Post
    ...........Well, there you have it, it DOES work Looks like some good work too.

    ................Buckshot
    yes, my son told me you have to take a good grade of metal that lends itself to smooth machining.... I am certain you know what he means just looking at your works
    by the way my son Pascal say's thank you......
    Reply With Quote Reply With Quote
  5. 07-31-2009, 09:07 AM #5
    canuck4570
    canuck4570 is offline
    Boolit Master
    Join Date
    Jul 2005
    Location
    Ile bizard near Montreal
    Posts
    871
    Quote Originally Posted by mrbill2 View Post
    You can do the samething for bevel base bullets.
    Mr. Bill2
    yes Bill2 just have to machine the pin accordingly but you will have to remove more in the center of the pin in order to create a pressure ring with the same inclination of the bullet around it so the lube won't go under
    Last edited by canuck4570; 07-31-2009 at 10:05 AM.
    Reply With Quote Reply With Quote
  6. 07-31-2009, 08:23 PM #6
    mrbill2
    mrbill2 is offline
    Boolit Buddy mrbill2's Avatar
    Join Date
    Oct 2008
    Location
    Pa.
    Posts
    399
    OK, No problem.
    Mr. Bill2
    Reply With Quote Reply With Quote
  7. 07-31-2009, 08:31 PM #7
    Charlie Sometimes
    Charlie Sometimes is offline
    Boolit Master



    Charlie Sometimes's Avatar
    Join Date
    Jun 2008
    Location
    Bristol, Virginia
    Posts
    1,129
    Upside-down nose punch.
    USMC 1980-1985
    Reply With Quote Reply With Quote
  8. 07-31-2009, 08:35 PM #8
    canuck4570
    canuck4570 is offline
    Boolit Master
    Join Date
    Jul 2005
    Location
    Ile bizard near Montreal
    Posts
    871

    nose punch

    you got the idea
    Reply With Quote Reply With Quote
  9. 07-31-2009, 10:25 PM #9
    mike in co
    mike in co is offline
    Boolit Master
    Join Date
    Mar 2005
    Location
    aurora,co
    Posts
    4,320
    so ask him what metal he used...
    i do all my 44 mag that way( well over 90%)....
    may have to build one for the 44hp miha just did...sure would be neater.

    mike in co
    only accurate rifles are interesting
    Reply With Quote Reply With Quote
  10. 08-01-2009, 12:59 AM #10
    canuck4570
    canuck4570 is offline
    Boolit Master
    Join Date
    Jul 2005
    Location
    Ile bizard near Montreal
    Posts
    871

    metal type

    Quote Originally Posted by mike in co View Post
    so ask him what metal he used...
    i do all my 44 mag that way( well over 90%)....
    may have to build one for the 44hp miha just did...sure would be neater.

    mike in co
    has soon has he come in saturday night I will let you know
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check