Has anyone seated PP boolits this way? The boolit base is dipped into my 'waxy-lube' to the seating depth then seated. Recovered boolits are clean of wax. The idea is to hold the boolit in place and it also happens to give a protective coating to the inside of my non-removeable enclosed muzzle break / semi-suppressor.
I believe the practice also prevents boolit base deformation. In this case, I did it because the patches did not have a tail twist or fold. Accuracy at less than 50yds seemed OK but at 100 or so was non-existant. (I suspect the alloy was too soft for the velocity).