Who makes a 32 win spl mold that is available today

[CENTEX BILL]

I am looking at a Win 94 in 32 spl. Who makes an availabe mold today is there a commercial source for cast boolits?

[jreidthompson1]

https://accuratemolds.com/catalog.ph...catalog-anchor


https://arsenalmolds.com/collections/all?page=3


https://www.mp-molds.com/en/product-...v=0b3b97fa6688

Sent from my SM-S938U using Tapatalk

[jreidthompson1]

https://missouribullet.com/results.p...6&secondary=35


https://www.bearcreeksupplybullets.com/32winspec180gr

https://oregontrailbullet.com/shoppi...&product_id=14

https://acmebullet.com/product-category/bullets/32-40/

Google can find more

Sent from my SM-S938U using Tapatalk

[Castaway]

RCBS 170 gr RN FP, checked

[Balrog006]

I am looking at a Win 94 in 32 spl. Who makes an availabe mold today is there a commercial source for cast boolits?

Do you want to try any of these?

LYMAN 319 295 single cavity 32-40 & 32 SPECIAL 175 GR.

WINCHESTER BULLET MOLD-32 WIN SPECIAL Integral blocks & handles

IDEAL Bullet Mold 32-165 Single Cavity integral handles-321265 Express bullet for same use and with same charge as 321232. In .32 Winchester Special rifles

[MostlyLeverGuns]

Matt's Bullets - .323 185 grain gas check flatpoint - very accurate in my 3 Marlins 336's.
Arsenal, Accurate, NOE also make .321 -323 molds. I like .323 in my Marlins.

[Eddie Southgate]

NOE is a favorite of mine but I have Lyman/Ideal , Accurate , Winchester and several others ranging from .321 - .326 that I use in .32 WS , 8x57, .32 Remington and eventually .325 WSM .

[Chief_10_Beers]

I shoot commercial cast in my 1952 Win 94. I've been using the Missouri coated and the Hunter's Supply Coated. They both work very well with the slight accuracy advantage going to the Hunter's Supply. I don't run them at top velocity. I just load them over 8grs of Unique.

[Hick]

I use the Lee 324-175GC, Lyman 31950 and Lyman 321-427 in my 32 Win Special

[Rich/WIS]

Midsouth has the RCBS in stock

[Eddie Southgate]

Noe SC325-180-RF-AI 1 5 is a fine flat nosed gas check bullet . He currently shows the 5 cavity in stock and has the nose punch also.

[gwpercle]

Noe SC325-180-RF-AI 1 5 is a fine flat nosed gas check bullet . He currently shows the 5 cavity in stock and has the nose punch also.

LIKE !

This would be my First Choice for the 32 Special ... and get the matching nose punch ... they are nice to have !
Gary

[35 Rem]

I have the NOE SC325-180-RF and if my memory is correct it would not chamber in my Miroku model 94. The problem is that it's a full .325 (or whatever diameter you size to) immediately in front of the crimp groove and in my rifle it hits the rifling well before the bolt closes. I had that mold already for 8x57 so tried it in the 32 Special just to see how it would work. The two bullets I use in 32 Special are RCBS 32-170-FN and Accurate 32-180-A. Both work perfectly when crimped in the crimp groove and have killed deer well. I drive them to full jacketed speed or very close. Always well above 2,100 ft/sec. The RCBS weighs 180 grains in spite of the "170" in the name.