RotoMetals2Titan ReloadingReloading EverythingLee Precision

Donate Now Goal amount for this year: 4000 USD, Received: 2190 USD (55%)
Our Annual server fund drive is going on now! This donation drive helps fund Cast Boolits for an entire year, and helps support our 2nd amendment rights! You can donate by Paypal by clicking the DONATE button. Or by Cash / Check / MO to the address below:

Willy Snyder
PO Box 2732
Pocatello, ID 83206


Page 50 of 50 FirstFirst ... 4041424344454647484950
Results 981 to 985 of 985

Thread: Citric acid brass cleaner

  1. #981
    Boolit Master

    dale2242's Avatar
    Join Date
    Oct 2007
    Location
    SW Oregon
    Posts
    2,842
    I use 1/2 teaspoon in my Lyman tumbler.
    That is plenty for a mirror finish.
    Oh yeah, and dawn.

  2. #982
    A.K.A. Bullshop Jr. SierraHunter's Avatar
    Join Date
    Jul 2016
    Posts
    181
    I've played with citric acid ratios in my Frankford wet tumbler. The more you use the more of a dull look the cases will have. The best solution I have mixed up so far is 2 parts Wash n Wax (turtle wax currently) and 1 part Zep citrus degreaser for the wet soap, and I use about 3 table spoons full off that mix, and then 1/4 teaspoon of citric acid (I use lemishine) in the number. you can let it run for up to the full 3 hours and the brass comes out sparkling.

    I just started playing with Zep 4358 but need to figure out the right ratios. I don't know why I'm bothering with the dry sap, the liquid solution I've been using works so good.

  3. #983
    Boolit Buddy
    Join Date
    Dec 2024
    Posts
    317
    Quote Originally Posted by dondiego View Post
    A 45 case is probably a teaspoon!
    I’ll have to check but I don’t think it’s that much, basically whatever pistol brass I’m cleaning is what I use. So a case of 9mm or 10mm etc etc gets added, if I’m cleaning rifle brass I just use whatever pistol case is on the bench.

    I honestly think the SS pins do the bulk of the work anyway, I’ve run batches with only water, soap and pins. Or just water and pins and cases come out looking new, these are cases that aren’t filthy or tarnished mind you.

  4. #984
    Banned


    Join Date
    Jan 2013
    Location
    Milan, MI
    Posts
    3,171
    Quote Originally Posted by Butcherbill View Post
    I’ll have to check but I don’t think it’s that much, basically whatever pistol brass I’m cleaning is what I use. So a case of 9mm or 10mm etc etc gets added, if I’m cleaning rifle brass I just use whatever pistol case is on the bench.

    I honestly think the SS pins do the bulk of the work anyway, I’ve run batches with only water, soap and pins. Or just water and pins and cases come out looking new, these are cases that aren’t filthy or tarnished mind you.
    Use a baking teaspoon. It is very small.

  5. #985
    Boolit Buddy
    Join Date
    Dec 2024
    Posts
    317
    Quote Originally Posted by dondiego View Post
    Use a baking teaspoon. It is very small.
    For sure, it doesn’t take much that’s for sure. Same with soap, I don’t have a laundry sink and am on a septic system so I rinse into pails which I then dump away from the well etc etc. I’ve got it down to the minimum soap needed to clean well but not take too much rinsing to get rid of the leftover suds.

Page 50 of 50 FirstFirst ... 4041424344454647484950

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check