loading for 8X56 M.95

[Murdock-]

Using a gas checked 205 gr bullet what loadings do you like? I am looking at loads to not hurt either the rifle or me.

[15meter]

I use the old military rifle standby cast boolit load 16 grains of 2400.

Shoots great and with 20+ pounds of 2400, I can shoot lots before I'll need to find a replacement load.

Are you using the Lee mold? I use the Lee mold as cast with Ben's Liquid Lube. Works well.

[Murdock-]

I got the bullets with the rifle, they are gas checked but do not know what mold. From the Lee molds I have seen, they could certainly be.

[bmats]

I'm getting ready to reload for my M95 soon as well. I just ordered the Lee mould and I'm going to try N140 powder. I'll let you know how it goes. I still have to order a neck expander and gas checks first.

[Noah Zark]

I use commercial cast 205 gr in the proper diameter over 12 gr of Unique. Tackdriver at 100 yds and pleasant to shoot.

Noah

[Intel6]

16 grs. of 2400 for me. I am using the NOE 230 gr. "Franken Bullet" gas checked and sized to .334"




Franken bullet web.jpg



M95 Actionammo web.jpg

[Battis]

I use:
12 grains of Unique
13.5 gr. Red Dot
215 gr. bullet

Much easier on the body than the factory ammo.

[K43]

What @Battis uses plus 12 grains of BE-86 worked from me.
My rifling slugs at .332", so I tried Patching .330" boolits and sizing down .338" ones. Sizing down like @Intel6 does worked better for me. As always YMMV.
Pistol powder loads like these tame the light little carbines.

[Kentucky146]

I use:
12 grains of Unique
13.5 gr. Red Dot
215 gr. bullet

Much easier on the body than the factory ammo.

215 gr, Is this a purchased or cast, if cast have ya got a mold number?

[Kentucky146]

I use the old military rifle standby cast boolit load 16 grains of 2400.

Shoots great and with 20+ pounds of 2400, I can shoot lots before I'll need to find a replacement load.

Are you using the Lee mold? I use the Lee mold as cast with Ben's Liquid Lube. Works well.

Which mold number? thanks

[15meter]

Which mold number? thanks

As far as I know, Lee only makes one mold that will work with the 8x56R. Don't have a clue what the number is.

Back in the day of paper catalogs it was listed by itself.

[K43]

Make friends with Google, Bing, DucDuckGo,or one of the multitudes of other search engines.

C330-205-1R

https://www.midwayusa.com/product/10...eUZ&pid=941952

https://www.ebay.com/itm/393668900659

https://www.amazon.com/LEE-PRECISION.../dp/B001GXDTZI

And threads here on Cast Boolits
reloading 8x56r cast boolits site site:castboolits.gunloads.com