Got enough guns(I know, sacrilege,). Problem is, most of my H380 is pre-zip code vintage, most likely WWII surplus. It still works well, but I prefer fresher powder for the 22-250, 220 Swift or the 243.
I'm a little pickier about the accuracy of those rifles as opposed to offhand dinger ringing with one of the Garands.
I have used reloader 15 norma 202 and shooters world match , all of which are hard to find , shooters world was a cheaper powder not any more and as hard to find as any now a days , I put schuster plugs in mine so I can use what powders are available .
I guess hogdons forgot they used to load USGI 30 cal with H380.
4895 isn't the original powder..it wasn't loaded until around 1944.
The garand isn't as sensitive as the internet leads you to believe.
Key rules are oprod spring is at least 19.5" long and it's properly greased and you will be fine with no modifications.
H335 - 49.0 grains I've used this load since about 1999 when I got mine from the DCM for $169.00 delivered to my door by the USPS.
I assume that you are also using 150gr bullets? That powder is available locally and is one of the ones I was looking at. Is this the only one you have used and how do you like it?
Thanks
GONRA sez IMR 4895 is THE .30-06 M1 Garand powder.
GONRA sez checkout IMR 3031, also ball powders close to IMR 3031 on the charts, etc.
Ramshot TAC and Accurate 2495 act very much like H4895, both are available at Powder Valley. At current prices, TAC is a bargain.
I do desire to buy the powder locally with cash. H335 is available locally as well as N140 and I do have a pound of N140 on hand. In doing an internet search I found this on another site. https://www.milsurps.com/showthread.php?t=65113&page=2&
I think at this point I have some loads I can load up with the N140 and I have heard some good things about the VV powders. I am also going to get a pound of H335 and try that one out also. It will be several weeks before I can go to the range but will report back with what I find out.
N135. Just a hair faster than H4895. It's available and it's no longer the expensive, hard to find powder it was. I've been using it since 4895 and 4064 became hard to find. N140 is good if you were a Varget/Re15 lover.
this is from the old NRA book.
I always used IMR4895
.
NRA LIFE Member
USPSA/IPSC
Don't ask how I know a slow powder can bend your op rod! I stay in the burn rate between 4895 and 4064. I put an adjustable gas plug on but have only used max 172gr bullets. I adjusted the plug to just get reliable function to take it easy on the action!
I bent it years ago and have played safe since! Parts are way more expensive now !
Just throwing it out there
Originally, IMR 4895 equivalent was the go to powder for them. Bruce Hodgdon bought up around 25 TONS of it after WWII.
Sold it by the pound for next to nothing and started Hodgdon powder with the enormous profits.
Shiloh
Last edited by Shiloh; 06-19-2024 at 06:45 AM.
Je suis Charlie
"A society of sheep must in time beget a government of wolves."
Bertrand de Jouvenel
“Any government that does not trust its citizens with firearms is either a tyranny, or planning to become one.” – Joseph P. Martino
“If you put the federal government in charge of the Sahara Desert , in five years there would be a shortage of sand.” – Milton Friedman
"Ideas are more powerful than guns. We would not let our enemies have guns; why should we let them have ideas?" - J. Stalin
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |