So many of you guys have disserted your lubrisizers I thought you might as well send them to me. I'm sure I can find a home for those poor orphans.
So many of you guys have disserted your lubrisizers I thought you might as well send them to me. I'm sure I can find a home for those poor orphans.
When one door closes, another opens...LOL
When the PC "fad" started I was able to pick up a couple of Lyman sizers super cheap. I had no real need for them but like having backup. If the SHTF and the power goes out, those antiquated bits of technology will still work. LOL
No such "deals" on Stars...yet.
Don Verna
For the original question of is it worth it apart from purely cosmetic reasons , My answer is yes it is , I now powder coat most of what I cast and if it was not for black powder cartridge and muzzle loading I would coat everything .
Yes it adds size , some molds I ordered with that in mind as I did not want to size , some I size as it adds consistency when reloading , for long term storage I find it is great , now I do not usually size till I load and have had no issues doing that with powder coated range scrap and wheel weight alloys , pretty hard alloys that ring when dropped and hard to scratch .
I keep the lubesizer and lube for a what if scenario , along with the alox / Recluse lube , I like the cleanliness and no sticky while loading , no build up in seater stem less mess on gun when shooting and clean up after .
I placed powder coated bullets in with different powders I use to check for any reaction , and found none with powders I use , as to cosmetics I could care less what color the bullet is , I want fit , less smoke , less mess , and the coating blocking oxidization is a big plus .
If what you are doing works for you great , do what works for you and what you like for your own reasons .
I guess I do not see the point . I cast then size/lube in one step then load. Seems like a bunch of extra work and time to me. Might be fine if you got plenty of time. I can loads hundreds on my Dillon before I need to clean any lube out of the seating dies. I think people get caught up in having pretty little colored bullets
They got clear if the colored ones bother you. Goes on white and cures/drys clear.
Took me awhile to realize it - but powder coating is just tumble lubing that you bake on instead of air dry.
Which I now use for my 356-125-2R because once powder coated it doesn't work in anything I have except my S&W 986. I literally can't even cram it into the case far enough to work as 9mm cases are thicker near the bottom. In THAT gun though, I can powder coat it and even crimp it in the groove and it works. I suppose because it doesn't headspace on the rim so it can be more open.
SASS #114019 --- WRDR790/N6RVT depending on the radio --- WRDR790 on Discord too
What are you sizing it to after coating?356-125-2R because once powder coated it doesn't work in anything
I have except my S&W 986. I literally can't even cram it into the case
far enough to work as 9mm cases are thicker near the bottom.
(Note: I'm running three different 147gr/Powdercoated bullets through 9 different 9mm's -- sized .357 -- no issues.)
(Multiple SIGs, Glocks, M&Ps, and a Walther)
Well probably so if you are NOT sizing after coating. Then they are whatever size you choose. I run 0.357" OC in several diff 9mm without issues. I do sort my 9mm brass though. Most foreign brads are quite thick as you get to the middle. Fine for 115gr, maybe 125gr but once you go to longer 147gr, you get little bulge in the middle that can prevent proper chambering. So I toss back anything but FC. Blazer, Xtrem, Starline or Blazer. Even Win & Rp can be problematic.
EVERY GOOD SHOOTER NEEDS TO BE A HANDLOADER.
NRA Cert. Inst. Met. Reloading & Basic Pistol
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |