I made a .460 350 gr GC mold today
It looks like a up sized LEE 430-310-RF
But I made it with a replaceable nose plug
One is a plain flat nose and the other is a 45 degree hollow point
I also plan on making a adjustable depth standard hollow point nose plug
I am planning on pouring the nose out of pure lead and the body from a harder alloy
But my question
I had a sprue plate from a 30 cal mold that I plan on reboring as it was a test mold and the test didn't work
So I put it on the mold
But the sprue plate hole for the lead to enter is way off center
I have the plate to make more sprue plates , but I didn't want to take the time to just make 1
I was hoping to to pour a few with both nose plugs in the next few days
But with the sprue plate hole way off center
I wondered if that would affect accuracy ?
Your thoughts
Thanks
John