I’m looking for some loads for my .43 spanish. I am thinking of using 5744 and was guessing around 18.0 grains to start. Any thoughts???
I’m looking for some loads for my .43 spanish. I am thinking of using 5744 and was guessing around 18.0 grains to start. Any thoughts???
Try doing a search outside the forum, the search function here can limit the time frame you search. Google, duck duck go what ever your favorite search engine is, include "castboolits" in the search string. You will get a number of hits. I have loaded for the 43 Spanish, don't remember what I used, and the load book is in the shed and I'm too lazy to go get it.
There is a formula for 5744 to calculate min/max loads based on case capacity to the base of the seated bullets, you should be able to find that. I'd quote it here, but geezer memory prevents me from being that silly.
If I recall correctly, Lee quotes any 45-70 load less 10% to start. Don't cast that in stone but that is what I remember as load recommendations.
It's a fun caliber to shoot, I've got one in a Remington rolling block.
And because brass for a 43 spanish can be made of unobtanium, there are instructions floating around the forum for making it out of belted magnum brass with a snap ring in the extractor groove standing in for the real rim. 7mm Remington Mag? I think
Last edited by 15meter; 07-08-2023 at 10:33 PM.
Ricky,
welcome to the forum.
BP is probably the way to go, maybe do some research on that. If you don't want to use BP, then I'd use Unique, maybe start with 10gr and work up. I've loaded a similar size cartridge (11mm Gras) with non-existent published load data.
If using Google for searching this website, type in your keywords, then "site:castboolits.gunloads.com" for best results.
Good Luck.
Last edited by JonB_in_Glencoe; 07-09-2023 at 12:36 PM. Reason: edited
~~~~~~~~~~~~~~
“If someone has a gun and is trying to kill you, it would be reasonable to shoot back with your own gun.”
― The Dalai Lama, Seattle Times, May 2001
22 grains of 4227 with a 300 grain bullet. Works great.
~~~~~~~~~~~~~~
“If someone has a gun and is trying to kill you, it would be reasonable to shoot back with your own gun.”
― The Dalai Lama, Seattle Times, May 2001
with Trailboss powderyou can't overcharge!
12th Ed CARTRIDGES OF THE WORLD
387 LEAD IMR 4189 32 GRS 1,360 FPS
387 LEAD IMR 3031 40 GRS, 1,310 FPS
I shoot a 43 Mauser a bit smaller in diameter brass I do:
340 Lead IMR 4198 30 grs
I can load heavier but the shoulder punishment increases with the grainage.
They suggest its safe to load up to 70% of the black power charge of 77 grains
but 30 grains is as a much as I care to handle. In my case the gun was built to originally take a chamber pressure 24,000 psi they recommend sticking to 20,000 psi and below in consideration of the guns age.
A general rule of thumb for 5744 in cartridges originally loaded with BP is 40% by weight of the BP charge. This level will come close to duplicating the original BP velocity. The original BP charge for the 43 Spanish was 77 grains if memory serves, so about 30 grains of 5744.
That's close, it's actually find the depth of the seated bullet you are using, fill the case to that level with 5744. Weigh the 5744 and multiple that value by .4 for a starting load. It's not much different but you are fine tuning your load for your specific bullet. And I'm not sure how close black and 5744 are in density. I remember the max load being quoted as 48%. But the max value is my geezerville memory.
The 40% starting load is quoted here:
http://www.saubier.com/forum/showthread.php?t=2066
Good luck.
I know the 40% of 5744 to the base of the bullet or boolit has worked for me in a dozen plus boomer cartridges.
Of course, we are all responding to a thread that was posted by a dude that made exactly 1 post and hasn't been back since
Just putting along to see what fish will bite ???
.348 brass makes pretty good 43 spanglish powder holders.
"Behold The Lamb of God that taketh away the sin of the world". John 1:29
Male Guanaco out in dry lakebed at 10,800 feet south of Arequipa.
That would be an inconvenience... Rainy days and / or 100+ days are good ones for such amusing projects.
"Behold The Lamb of God that taketh away the sin of the world". John 1:29
Male Guanaco out in dry lakebed at 10,800 feet south of Arequipa.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |