Who can tell me the size of O-ring OR, where to get them for Lyman Sizing Dies.
Thanks
Who can tell me the size of O-ring OR, where to get them for Lyman Sizing Dies.
Thanks
Harbor freight has bulk O-rings, you can match them up with what you have.
Pressure nut - #16, 13/16 x 1-1/16 x 1/8
Die - #35, 9/16 x 11/16 x 1/16
Not as cheap as the hardware store, but if you call Lyman they'll sell 'em to you--- and you don't have to drive into town to get them.
In school: We learn lessons, and are given tests.
In life: We are given tests, and learn lessons.
OK People. Enough of this idle chit-chat.
This ain't your Grandma's sewing circle.
EVERYONE!
Back to your oars. The Captain wants to waterski.
for bags of 100 and a huge variety of different material such as viton, butyl, ect. mscdirect is where I order orings. its saved me $100s compared to buying from hydraulic suppliers
Most Ace Hardware and farm stores should have them. I carry in my old ones and match them up. hc18flyer
Think I got mine at Ace, but any well stocked hardware outlet should have them. The brand on mine is DANCO and are labeled #35. They come 10 to pack. If you can't find them locally PM me your address and I'll send you a couple.
I bought mine from Ebay. Brownell's also carries them. They are not one of the usual stock sizes. I've got both metric and SAE o-ring sets, and nothing I had fit them properly. Though I see others say otherwise. Some of my sets are quite old, and been picked over for years. YMMV!
Bill
McMaster-Carr, if all else fails. They'll have the right size, and you'll get 'em in less than 48 hours, but that shipping is expensive.
Cognitive Dissident
Late reply both LYMAN and RCBS sizing die's use US standard AS568 no 015 orings 9/16 x 11/16 x 1/16 70 shore/Durometer ,Mc Master part number 9452k59 $5-43 per 100 , Hope this helps.
Last edited by andy h; 05-09-2023 at 07:51 PM.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |