Is it possible to permanently fix the cartridge magazine cover on a Remington 700 BDL DeLuxe?
Is it possible to permanently fix the cartridge magazine cover on a Remington 700 BDL DeLuxe?
"When the homeland is in danger, everything is allowed, except not to defend it."
Gral. Don José de San Martin.
Why would you want to???
Easiest way would be to locktite the hinge and latch. This way will also maintain the original looks.
Next would be to silver solder or weld the floor plate in place. This way may be required if its for legal reasons.
I would have to look and measure but there may be enough room to drill and tap for a couple screws
Does it open too easy, such as under recoil?
If you really have to, change it over to ADL configuration. The receiver is identical. I have changed ADLs to BDL configuration. Go the other way if needed.
It is in .338 Winchester Magnum caliber, and on several occasions, due to recoil, the lid opened and the cartridges fell from the magazine.
Thanks for your comments. They are helpful.
"When the homeland is in danger, everything is allowed, except not to defend it."
Gral. Don José de San Martin.
On the Ultramags Remington used two latch springs. I'd try that first, it will probably solve your problem.
A new stronger spring should cure it.
If not, install a pin from the side to lock the latch button in place. Easily done on this aluminum part.
I’ve always preferred blind magazines.
Sent from my iPhone using Tapatalk
.
I would suggest using a file on the floorplate latch's "hook" to make it's engagement angle tighter, ergo giving it a harder "bite" when engaged with the floorplate.
Alternately, the floorplate can be epoxied to the bottom metal around it's edges to secure it (some heat will melt the epoxy if it needs to be removed at some future date).
Now I lay me down to sleep
A gun beside me is what I keep
If I awake, and you're inside
The coroner's van is your next ride
Go to Pacific Tool and Gauge, web site, they sell steel bottom metal to replace the Rem factory aluminum plus 700 bottom parts.
“There is a remedy for all things, save death.“
Cervantes
“Never give up, never quit.”
Robert Rogers
Roger’s Rangers
There are three kinds of men. The one that learns by reading. The few who learn by observation. The rest of them have to pee on the electric fence for themselves.
Will Rogers
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |