This is also useful for the S&B.
https://www.mp-molds.com/tipstricks/...ble-dt-method/
Hi Phil
This is also useful for the S&B.
https://www.mp-molds.com/tipstricks/...ble-dt-method/
Hi Phil
I always PC before I size. I’m always afraid the lube used for sizing, could hinder the PC from sticking correctly.
When sizing 45 rifle (.459-.460) bullets down to for pistol,...afraid the lube used for sizing, could hinder the PC from sticking correctly.
- I'll (RSBS) lube/size down to .454 . . .
- Boil them with a dash of dishwashing soap (2x) 30-secs
- Rinse/boil (1X)
- Dry.
All told about ten minutes total.
Works for S&B PC like a charm after that
High humidity will also make it difficult to get the static charge built up for the powder coat to stick. Not usually a problem in the winter, but something to think about.
quando omni flunkus moritati
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |