Any body tried this? I'm think of trying to polish a couple of bores that could use a bit.
I was thinks of a small batch of shake and bake with some fine grit in the powder.
Any body tried this? I'm think of trying to polish a couple of bores that could use a bit.
I was thinks of a small batch of shake and bake with some fine grit in the powder.
Those who choose violence as a first option are typically confronted by somebody else using violence as a last resort.
Live a good, honorable life. Then when you get older and think back, you’ll enjoy it a second time.
Do not confuse my being polite for weakness.
Using MX Linux 21
From the free state of Idaho
If the particles of grit can be pushed into and imbed in the powder coat easier than they do Lead--- it won't work as well.
I can't see how it would hurt, you just might need to do a few more shots to get to the same place.
In school: We learn lessons, and are given tests.
In life: We are given tests, and learn lessons.
OK People. Enough of this idle chit-chat.
This ain't your Grandma's sewing circle.
EVERYONE!
Back to your oars. The Captain wants to waterski.
Since it is usually done with pipsqueak loads I'd skip the PC.
I’ve often wondered about that same thing. It would be interesting if someone tried it let us know how well it works.
I be more worried about grit contamination to any/all of your related PCing components. Grit for fire lapping should be applied with flat plates, regardless of copper jacketed, lead, or PC. Unless I am planning to fire lap other weapons of the same caliber, the brass I used for fire lapping gets trashed.
Last edited by oley55; 10-10-2022 at 10:59 AM.
“Some people spend an entire lifetime wondering if they made a difference in the world. But, the Marines don't have that problem.” Ronald Reagan
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |