I use the TC plastic snail capper. Works on rifles and revolvers. It has a hole that is large enough to set the cap tin in and dump the whole thing at once. Open once and dispose of the tin.
I use the TC plastic snail capper. Works on rifles and revolvers. It has a hole that is large enough to set the cap tin in and dump the whole thing at once. Open once and dispose of the tin.
A vote for anyone other then the conservative candidates is a vote for the liberal candidates.
Boy, I can relate to this thread. Slippery & tight is my most common experience. A finger nail at the junction or a knife blade gets me started.
The tins are just to get them home, then they go in a capper or a holder for range use. I have used a Ted cash capper for on to 40 years now along with a home made leather holder that holds 6 for the range or hunting. Although long ago some caps came in tins with knurled lids.
That's what Altoid tins are for - if shooting at a range it makes it pretty easy to get your fat fingers in to wrap caps - easy open easy close. For rifles, I use a Ted Cash capper that I bought from Ted many years ago at Friendship.
I just use a narrow strip of that traction tape they sell for skateboards, one strip on lid one around the base. Easy peasy lemon squeezy!
An old Cherokee was teaching his grandson about life. "Inside me two wolves fight," he told the boy.
"One is evil - he is anger, envy, greed, arrogance, self-pity, resentment, lies, false pride, and ego. The other is good - he is joy, love, hope, serenity, humility, kindness, generosity, truth and faith. The same fight is inside you - and every other person, too."
The grandson thought for a minute and asked,"Which wolf will win?"
The old Cherokee replied, "The one you feed."
Man I just wish I could find some to remember how much trouble it is to get in to them
That caused me to look on Gunbroker to see what I could see.....Yowzers! Think the prices for primers are bad? Try $30/hundred! And very few on offer.
Then I searched Ruger Old Army, 'cause I have a stainless one I bought over 20 years ago for a couple hundred. Yowzers again!
Proving the ancient investors' rule that in times of inflation, own stuff.
Cognitive Dissident
For holding the caps and installing them on the nipples of my Rifles, I have always used a Capper made out of two layers of leather with holes punched in one layer.
This is what our forefathers used.
This doesn't work on revolvers.
But it is great on rifles
Next time you have a tin open, place the smallest amount of Imperial case sizing lube on the rim and lid. I do this with pellet tins and those as-is are easier then cap tins to open (screw tops). Just a smidgen rubbed on does a world of good.
45_Colt
As observed by several others in the thread, putting them in something else is a great solution. Other stuff that needs opening improvement are cheese sticks and packing tape. Just saw a cartoon where the devil is having an award ceremony and says, "This month's employee of the month is Bob (a little devil) who invented the roll of packing tape that really has no end to find."
DG
Last edited by Der Gebirgsjager; 08-04-2022 at 11:52 AM.
Amen Broken bear.
Siamese4570
I’ve been wanting a Ruger old/new army for a couple of years and wil NOT pay what they go for, probably why I’ve been waiting 8 months for a new Ruger SBL.
The last time I waited 8-9 months for something to get released it cost me hundreds of thousands over 25 years…
Art
”Only accurate rifles are interesting”
——Townsend Whelen
In a time of universal deceit , telling the truth is a revolutionary act
—- George Orwell
Yeah just bought the only tin of caps within a hundred mile radius of my house Remington number ten's = $18 /100
Rang a feller about three hours away - he has plenty RWS $22/100 for top hat caps , $18/100 for 10 & 11 --but NOBODY is shipping dangerous goods - six hour drive with gas at two bucks & twenty a litre .................THEY are tryin to wear us down!.... new shipment of Wano powder he says will be $190 per kilo and drive to collect it.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |