Hi guys
Coated some boolits today
Did the wet coating method with acetone but instead of chucking out on a grid to dry I dumped them in my tumbler with only plastic bbs thats got some powder stuck to them.
After about 30 secs they were all lightly dusted and seperated. Stood them up on a baking tray and let them stand for about an hour (daddy duties)
Pre heated the oven to the powder manufacturers prescribed 180°C.
After about a minute the boolits started sweating. There were tiny droplets everywhere. After the bake and water quench the bubbles turned into little pits
I always see such nice shiny PC boolits, what am i doing wrong
I am using an epoxy powdercoat
Sent from my SM-A325F using Tapatalk