For lack of a better place to post, what was the most bonehead thing you've done to date/recently while reloading.
I'll start, I've not reloaded in a very long time, of coursei remember the safety stuff. I was prepping cases for the .44 mag and the .357 mag, which means I was depriming the cases with a low universal depriming die. Afterwards I resized the 44s and reloaded them and put the 357 away for another day. Well I pulled them out and went ahead and primed them and expanded the case mouths, filled them with powder and started setting bullets. I do this in two stages, I know it takes longer, but it's just what I do. Anyway, I started crimping them and noticed that some were loose even after crimping. I guess I was about 15 deep and something just still wasn't right. So I pulled the Blackhawk out and tried to chamber one if the finished rounds, yeah it didn't fit. Then I tried a different one and different chambers. Yup none fit. I forgot to go back and resize them.
So anyone have a preferred bullet puller?
Sent from my moto z3 using Tapatalk