I just use clean cola bottles for acetone or any solvent. Works fine.
CW, how the knee working now?
I just use clean cola bottles for acetone or any solvent. Works fine.
CW, how the knee working now?
Whatever!
Powder Coated 500 Lee 311-93-1R
150 Lee 429-200RF & 150 #358311.
I stand up all my bullets on their non-stick aluminum foil covered trays. Those tiny ones are Hard.
I gotta get some of those metal baskets that CWLongshot uses.
I HATE auto-correct
Happiness is a Warm GUN & more ammo to shoot in it.
My Experience and My Opinion, are just that, Mine.
SASS #375 Life
I am using Pat Marlin's gas check makers. I did a whole "how I do it":
https://castboolits.gunloads.com/sho...ake-gas-checks
They work GREAT! I love shooting full power 10mm in my GP100. But I'll shoot 100 rounds and my barrel is clean after a wet then dry patch.
WWG1WGA
About 3 years ago, I bought a BUNCH of 308 Winchester LC brass that was primed.
I finally got around to loading the last 75 of those.
At this point all my 308 brass is needs to be prepped before I can load anymore. I have a bunch that really should be annealed and then it all needs to be trimmed. I think that'll be a Saturday when I'm not doing anything else.
WWG1WGA
NRA Life member • REMEMBER, FREEDOM IS NOT FREE its being paid for in BLOOD.
Come visit my RUMBLE & uTube page's !!
https://www.RUMBLE.com/user/Cwlongshot
https://youtube.com/channel/UCBOIIvlk30qD5a7xVLfmyfw
I ignored the mess and finished processing about 1250 pieces of 9mm brass and pushed that off to the side to cast some more boolits.
Mal
Mal Paso means Bad Pass, just so you know.
I cast about 200 40 cal boolits and about 3lbs of #1 buck...
I really want to take OO buck, O buck and #1 buck and see if I can get a combination that is lead dense and patterns well...
WWG1WGA
I had too many things going on in the Man Cave/Garage/Reloading room. Some furniture refinishing going on, but the Mail brought my Hornady # 11 today so I had to sit at the Bench looking through it!
BLL then gas checked some boolits for a 280 Ross and a 6.5x52.
Loaded 5 test rounds for the 280 Ross, fed and fired well. No leading, bore wiped out with a dry patch.
Now to start stepping up the load. Cases were pretty sooty.
Made a wood plane kit for a buddy so he can help his autistic son assemble it. He's crazy about planes.
Reloading room is kind of a do everything shop!
Ran 180 38 Special cases through the sizer and expander dies, then primed them with an RCBS hand primer. I was gifted some Clays a while ago by a member on this forum and im gonna try it out.
ran 700+ of 5.7x28 through the sizing die, only had 6 shoulder failures. a quick gentle clean is next,
Went to the range and shot 38 Special from the the Colt Official Police. 40 loaded with 2.7 grains of Clays and 40 with 2.3 grains. They both shot to point of aim and I want to be easy on the old revolver so I loaded all 135 of my 38 Special cases with 2.3 grains under a 150 grain hollowpoint(I know I need a lot more cases). Clays does seem to burn hotter than Red Dot, cases were noticeably warmer, but with less recoil than the 2.8 grains of Red Dot that I normally load. Ive wanted to try this powder for awhile since it was gifted to me a couple of years ago.
Just cast a few 44-40 bullets and prepped 50 cases. I don't do huge batches of anything. Even 50 is a big lot for me these days.
"In general, the art of government is to take as much money as possible from one class of citizens and give it to another class of citizens" Voltaire'
The common virtue of capitalism is the sharing of equal opportunity. The common vice of socialism is the equal sharing of misery
NRA Benefactor 2008
Working on making some Wrangler grips from native pecan wood.
Sent from my SM-A716U using Tapatalk
I am working on a batch of 45-90. trying to find a load with less recoil. any ideas?
Lubed and sized 30 nine mm boolets left over from last casting session.
Old retired guy in Baton Rouge La.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |