Is there anyone on the forum using 444 Marlin Cases to form anything. This could be New are Old Cases
Is there anyone on the forum using 444 Marlin Cases to form anything. This could be New are Old Cases
NRA Endowment Member
International Ammunition Association
New York, the Empire State Where Empires were Won and Lost
I have used them with differing success for .410 and .44 XL shot cases.
Robert
8x57IRS is what I use them for
NRA Benefactor 2004 USAF RET 1971-95
375 Waters Express.
BIG OR SMALL I LIKE THEM ALL, 577 TO 22 HORNET.
I had a bunch recently picked up in a garage sale. Some new 444 Marlin and many fire formed for 375 JDJ.
The new ones found a new home quickly.
Good for 356 Win, 307 Win, 308 Marlin, Also made some 8x57 Rimmed with them. Have made long 45 Colt shotshells, but they do bulge as undersize for the 45 Colt. Some have used for 44-40 and 38-40, head is correct rim is close, usually need neck reaming.
I use them for my rifle in .375 JDJ.
Yup, 375 JDJ Pistol here.
I have cut a few to size and run them partway through a .44 mag die to make shotshells for .45 Colt, but haven’t loaded any yet.
"Experience is a series of non-fatal mistakes"
Disarming is a mistake free people only get to make once...
.307 Winchester.
If you are going to make a hole in something. MAKE IT A BIG ONE!
358 Bellm.
410 2 3/4"or trim to 2.5" for a judge
Tried them in a 45 Colt/410 Thompson Center barrel as stooopid long 45 colts to get the boolit out to the rifling. They work "ok", nothing to write home about.
Probably not worth the effort but as a conversation piece at the gun club.
309,358 and 375 JDJ calibers. All 14 '' contenders. Also a 444 marlin rifle.
Last edited by tctender; 04-15-2021 at 03:01 PM.
405 jes (what i want)
Ad Reipublicae his Civitatum Foederatarum Americae, ego sum fortis et libero. Ego autem non exieris ad impios communistarum socialismi. Ora imagines in vestri demented mentem, quod vos mos have misericordia, quia non.
To the Republic of these United States of America, I am strong and free. I will never surrender to godless communist socialism. Pray to images in your demented mind, that you will have mercy, because i will not.
MOLON LABE
Shorten them for .44 Shot loads that don't need a shot capsule.
Cognitive Dissident
I use them for 410 shells but there is no reforming them, they work great just as they are.
I recently was playing around on the bench and ran a .44 Mag and a .444 Marlin case into a .357 Auto Mag trim die, I don't have a .357 AM barrel for my Auto mags but bought the form dies years ago incase I ever found one. I think the .357/.44 rem mag case would be a fun round in a Contender.
MOLON LABE
Kelly J. Nolte 3/20/53 - 11/6/08
http://www.rememberingkelly.com/
Ronald Reagan's Ghost in 2024
I just started using them for 375 JDJ as well. Pretty easy process I must add.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |