The grinding attachment for my wife's mixer did just fine this past November on a doe and eight pointer (about a hundred total pounds, half of which was ground).
The grinding attachment for my wife's mixer did just fine this past November on a doe and eight pointer (about a hundred total pounds, half of which was ground).
We have made 2 batches already
The waltons premix and a homemade mix
Waltons was good tangy if you add the recommended citric acid
The homemade was also very good
Smoked both batches about 6 hrs starting at 120 and bumping up 10 degrees wvery hr ( do not exceed 180 or you could fat out ruin the batch) till 165 internal . no smoke first 45 minutes
Last edited by Smoke4320; 06-22-2020 at 05:47 PM.
[SIZE=4][B]Selling Hi Quality Powdercoating Powder
I carry a Nuke50 because cleaning up the mess is Silly !!
http://www.bing.com/search?q=nuke50&...7ADE&FORM=QBLH
I am not crazy my mom had me tested
Theres a fine line between genius and crazy .. I'm that line
and depending on the day I might just step over that line !!!
[SIZE=4][B]Selling Hi Quality Powdercoating Powder
I carry a Nuke50 because cleaning up the mess is Silly !!
http://www.bing.com/search?q=nuke50&...7ADE&FORM=QBLH
I am not crazy my mom had me tested
Theres a fine line between genius and crazy .. I'm that line
and depending on the day I might just step over that line !!!
I have been using basic Cabelas model , cost under 100 buck. Mine is twenty years old. I grind moose every year. I think I paid 60 or less.
I have thought about expensive Cabelas grinds but I don't use it enough.
Last edited by Ivantherussian03; 10-21-2018 at 11:40 PM.
Thanks
Ivan
Number #513
Yeah I figured it out. It would not be ALASKA……... unless it was the absolutely the toughest it could be and worst possible case scenario!
I have the cheaper Cabelas grinder also. It works find for grinding deer for making summer sausage and other things. Now working with sausage and par freezing me, I am afraid I will break it. Looking to upgrade but hoping for a second hand sale on FB market place but people are way overpricing everything any more.
Well i just upgraded to a Cabelas Carnivore 1HP.
Wow the difference is night and day. Just drop pieces into the 22 chute and done no pushing.
Ground 3 5 lbs of frozen 3/4-1" chunks of pork butt in literally less than a minute. Fast as i coud drop the pieces in it shot out the other side
[SIZE=4][B]Selling Hi Quality Powdercoating Powder
I carry a Nuke50 because cleaning up the mess is Silly !!
http://www.bing.com/search?q=nuke50&...7ADE&FORM=QBLH
I am not crazy my mom had me tested
Theres a fine line between genius and crazy .. I'm that line
and depending on the day I might just step over that line !!!
ive got a Weston 32. Its an animal. I would probably grind 2x4s! My choice would come down to two. Either a Weston or an lem and at least a 22 if your doing more then a couple deer a year. Had a lem 12 and it worked but second grind for sausage was a work out. With the bigger grinder you can about drop ground meat down the big shoot and it does the work for you with no pushing. Did I tell you I love this thing? Only down side is its a heavy brute to even lift on to the counter.
I have a size 32 grinder that is used for moose and pork. As was mentioned by poster #6 above, the plates and knives eventually get dull. Mine were getting a bit dull as some stringy stuff was pilling up in front of the plate and not getting cut. I polished the plates and cutters on a sheet of 600 grit carborundum paper on a hard flat surface. It improved the cutting (grinding) noticeably.
Sharpening the plates and knives is part of grinder maintenance that is rarely discussed on forums. What is discussed is how the new grinder worked but when it ages through use the plates' cutting edges get a bit rounded and need to be refreshed.
Peter
Last edited by GunStuff; 03-26-2021 at 04:30 PM.
I was about to ask if anyone has used a grinder attachment for a kitchen aid mixer that could compare to the standalone grinders. Sounds like the standalones are a lot better from what I'm hearing vs what I've experienced with the Kitchen Aid.
In school: We learn lessons, and are given tests.
In life: We are given tests, and learn lessons.
OK People. Enough of this idle chit-chat.
This ain't your Grandma's sewing circle.
EVERYONE!
Back to your oars. The Captain wants to waterski.
https://www.smokehousechef.com/stain...chool-version/
I've had this one for years....countless deer and momma's mixer is none worse for wear. Not cheap, but if you're already invested in an industrial model kitchenaid, I couldn't recommend this enough.
"Do not follow where the path might lead, go instead where there is no path and leave a trail" Ralph Waldo Emerson
The Kitchen aid will work if you're doing a small amount but, a real grinder of at least 3/4 HP will do a lot more a lot quicker. Little machines do little work.
BIG OR SMALL I LIKE THEM ALL, 577 TO 22 HORNET.
We've got a Kitchen Aid mixer, the "heavy duty" version. Have the grinder attachment (and others). It will grind meat all day long. I don't think we'll ever have to replace it, it's built that tough. Both daughters liked it so much, it was one of their first purchases once they got on their own.
Cabela's best, done several hundred pounds of game meat. 2000lb bison. Two big domestic hogs.
My three Sons are carnivores!
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |