Anyone have any favorite recipe they'd like to share? My can of one shot is almost gone and it sure is 'spensive.
Anyone have any favorite recipe they'd like to share? My can of one shot is almost gone and it sure is 'spensive.
Red bottle heet and lanolin. I use paste lanolin. But it means an extra wash with simple green to get it off.
"EXPERT= Ex is a has been, spurt is a drip under pressure" Unknown
What is the ratio?
1 bottle heet and 2 tablespoons lanolin paste. Adjust from there to your liking. I use paste cause I had a tub of it from a project. Havent used liquid but i'm sure it's easier.
"EXPERT= Ex is a has been, spurt is a drip under pressure" Unknown
And always shake before using
"EXPERT= Ex is a has been, spurt is a drip under pressure" Unknown
Alberto VO5 Hair Dressing.
Maker of Silver Boolits for Werewolf hunting
Dissolve as much Lee Case Lube ( the white waxy stuff in the tube) in a small container with Denatured Alcohol . I use a small baby food jar and shake it until no more case lube will dissolve.
Strain the liquid into a small spray bottle , 6 oz. , with a squeeze handle and on/off tip that controls the spray . From wally mart travel section around pharmacy
Spray the cases , roll around and let dry . They dry in a minute or two and size .
Works so much better than finger application and the thin dry wax wipe off ... No Mess.
Gary
Certified Cajun
Proud Member of The Basket of Deplorables
" Let's Go Brandon !"
Lanyon and alcohol
Shake and spray.
You can buy liqud lanyon for about 10 bucks on amazon. That bottel will lastbgg you years or more.
Sent from my SM-G960U using Tapatalk
Lee case lube ina tube - first one lasted me years - its a very minor expense
Liquid Lanolin from Amazon: https://www.amazon.com/Lanolin-softe...%2C240&sr=8-19
&
91% Alcohol from Amazon or other source - https://www.amazon.com/Amazon-Brand-...5008650&sr=8-3
Each person seems to have their own mixture ratio ranging from 16-1, 12-1, 10-1, and most commonly 5-1
Here is a thread on this site about the topic; with about 75 posts on the topic: http://castboolits.gunloads.com/show...ohol-case-lube
Mustang
"In the beginning... the patriot is a scarce man, and brave and hated and scorned. When his cause succeeds, the timid join him, for then it costs nothing to be a patriot." - Mark Twain.
Hornady Unique case lube works great is cheap and a can will last a very long time. Imperial die wax is almost as good is cheap and also a can will last a long time.
You need 100% pure liquid lanolin for it to stay in solution
https://www.amazon.com/s?k=liquid+la..._ts-doa-p_1_23
You also need at least 92% alcohol so it dries in a reasonable length of time
98%
https://www.amazon.com/ISO-HEET-2820...%2C234&sr=8-10
I add 1 ounce of lanolin to the 12 oz. bottle of red iso heet dropping a marble, bullet, boolit in it to act as an agitator.
[some people add up to 2 ounces of lanolin to 12 oz. heet but I feel it stays too sticky! I'd suggest you start with 1/12 and you can always add more if you want]
I label and leave the bottle of heet with the lanolin mixture on my bench and shake&add it to a small spray bottle whenever it runs low.
I used an empty eyeglass cleaner spray bottle
this is a little bigger but won't tip as easily https://www.amazon.com/Tolco-Bottle-...44&sr=8-8&th=1
mine is more like this https://www.amazon.com/Spray-Bottles...s%2C244&sr=8-9
A can of Bag Balm ...
https://www.walmart.com/ip/Vermont-s...B&gclsrc=aw.ds
Regards
John
Castor Oil works for me, but I am a cheapskate!!
In school: We learn lessons, and are given tests.
In life: We are given tests, and learn lessons.
OK People. Enough of this idle chit-chat.
This ain't your Grandma's sewing circle.
EVERYONE!
Back to your oars. The Captain wants to waterski.
STP oil additive, just put a little on a felt pad and rub it in, then roll your case
on the pad and size. Just takes a light coating, wipe off case with dry rag.
If your really cheep STP is the way to go. Been using it for 40 yrs.
GONRA's cast lead boolit shootin' has been 99% limited to auto pistols with (mostly)
range lead boolits selected so all lube grooves are within the loaded cartridge case.
Once NRA came out with the 50/50 beezwax/ALOX 2138F boolit lube,
purchased a gallon of pure ALOX 2138F from the manufacturer.
Just run pure ALOX 2138F in my Lyman Lube Sizer.
.25 ACP --- on up --- .455 W&S Auto.
Verks Just Fine for (most) my slam bang shootin'....
(Sometymes have to upgrade to a harder scrap alloy. etc.)
Bag Balm here. The RCBS case lube was repackaged STP.
Wayne the Shrink
There is no 'right' that requires me to work for you or you to work for me!
in a pinch ive used stp oil treatment and also Johnsons paste wax. little goes a long way. I'm not sure what kind of wax imperial is but ive never had a stuck case with it and as you apply it to one shell at a time I'm able to inspect brass as I lube it.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |