Let's see them. Manufacturer, and caliber, and what your plans are for it.
Let's see them. Manufacturer, and caliber, and what your plans are for it.
[SIGPIC][/SIGPIC]
With the state closed down, and no gun shows anywhere close, I've only purchased one single shot rifle, and that was last year from Simpson Ltd. My gun fund has been building the last year, so whenever things do open up here I think myself and others will go on a buying spree!
Showed this one before, but it's the unique Rolling Block I got from Simpson's. All I did was make a new firing pin, and screw, and repair some missing wood chips.
It's a very cool old sporter, and I found it thanks to someone here posting a link to it, when it was offered for sale at Simpsons.
I got this one also from Simpson about three weeks ago. I had planned on sending it to JES for boring it to 40-65 Winchester. Jesse explained that rechambering to that cartridge would not clean up the shoulder area of the 8x58RD current chambering. So I'll have to get more funds together and take it to Al Story's Brochardt Rifle Company this Spring or sooner if funds become available. I'll use their barrel and let them do the chambering and fitting. It's nice his shop is only two hours away on a nice drive down picturesque New Mexico Hwy 181.
It's a 1867 Remington.
Conversion date 1896.
Chambering is 8x58RD.
[SIGPIC][/SIGPIC]
Shows have been going on down here for a while now. I picked this up a few months ago at a show near me. Paid $140 for it which I think was about $40 too much but have never actually seen one like it. I've seen doubles using this action type but this is the first single I have seen. No makers or seller marks that I can find but it does have belgian proofs on the frame and barrel. It is a 16 ga. Chamber is not well defined so I'm going to stick with 2 9/16" when I get around to loading it. Where I shoot doesn't allow scatterguns so going to try to work out a round ball load of some sort. Bore is good, lots of "patina" on the outside. Sorry for the poor pics, just one of those days.
Just an FYI, there is a show in my area tomorrow but I ain't going as I'm sure it will be a zoo and there will not be any bargains. Forget bargains, there probably won't be anything reasonable. Super spreader event on top of that!
Rusty, what kind of marking are on the water table. It should have some Mark as to chamber. Likely a number in milimeters with a circle around it. Sorta of like this:
It shows the gauge (12) and the (70) which is the chamber length of 70 millimeters. Look to see if your water table has this type of marking.
[SIGPIC][/SIGPIC]
Rusty, the frame is where you'll find markings if any that will give you the length of shell you should be using. European shotguns, especially the older smokeless and almost all of the black powder guns have extensive proof stamping and other informative marking on both barrels and frame. Here's one that informs you about the choke on the barrels. This is also a 16 gauge barrel.
[SIGPIC][/SIGPIC]
Not sure if it counts--
It's 12 ga. BP percussion.
From the proof marks, it was made in Belgium between 1840 and 1890.
Just a wild guess, but from the wear & tear, and repairs- it looks like a Civil War veteran.
I found this in a thrift store for $50. not too terribly long ago. I couldn't leave it there.
I re-soldered the pieces between the barrels, re-blued it, and hung it on the wall.
In school: We learn lessons, and are given tests.
In life: We are given tests, and learn lessons.
OK People. Enough of this idle chit-chat.
This ain't your Grandma's sewing circle.
EVERYONE!
Back to your oars. The Captain wants to waterski.
In school: We learn lessons, and are given tests.
In life: We are given tests, and learn lessons.
OK People. Enough of this idle chit-chat.
This ain't your Grandma's sewing circle.
EVERYONE!
Back to your oars. The Captain wants to waterski.
Bought this Ruger No. 3 in 45-70 last year. I'm tempted to rebarrel it to 30-40 krag or trade for one.
I have a Number Three in .30-40. It wallops me pretty good with factory 220gr loads. I sure wouldn’t want to shoot a Number Three in .45-70..
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |