With a lack of 43 Spanish Brass in my part of the world what else can be reformed or used to load the Remington Lee .43 Spanish rifle?
Thanks
With a lack of 43 Spanish Brass in my part of the world what else can be reformed or used to load the Remington Lee .43 Spanish rifle?
Thanks
These are made in Australia
https://www.grafs.com/catalog/product/productId/1174
https://bertrambrass.com/
Mike
p.s. I have made it from 348 Winchester but it is a real pain in the butt to do.
Last edited by skeettx; 09-11-2019 at 09:31 PM.
NRA Benefactor 2004 USAF RET 1971-95
I got mine from Track of the Wolf, about $3.25 (U.S.$) each, very nice brass. But....you may have an importation problem.
Thanks guys. I get quite a bit of gear from TOW but know there are export restrictions on cases other than shotgun. I have Kangaroo brass from Aussie for the 450/577 so that is probably the way to go, had forgotten the company's name.
Thank you
Read through this thread, I've made some with 300 win mag brass, if you have access to a lathe it makes it easier. Have a batch partially formed, I'll finish them up during the tween season--between shooting and motorcycle season and hard water sailing season
http://castboolits.gunloads.com/show...ade-from/page2
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |