I have a Browning 53 32wcf and it is a fine shooter,problem is it throws fired brass a loooong way and in no particular direction. Has any one lightened the ejector spring on theirs? How many coils needed to be removed? Thanks
I have a Browning 53 32wcf and it is a fine shooter,problem is it throws fired brass a loooong way and in no particular direction. Has any one lightened the ejector spring on theirs? How many coils needed to be removed? Thanks
Last edited by Rimfire; 06-23-2019 at 10:11 PM.
.
Because the ejector spring is the heart of the action work some folks have cut coils off but this sometimes causes the gun not to eject properly.
This is because the spring does not have much travel to start with and if it’s cut, over time, they tend to take a set and no longer work.
A proper spring is available for $8.50: https://store.stevesgunz.com/index.p...e98g5v9avrpqf5
.
Now I lay me down to sleep
A gun beside me is what I keep
If I awake, and you're inside
The coroner's van is your next ride
Thanks I'll look at getting a replacement spring. Hopefully the Rossi 92 clone will be right for the Browning also.
Ordered a spring,put it in today,much better.
.
Good on you - I luv it, when a plan comes together.....
.
Now I lay me down to sleep
A gun beside me is what I keep
If I awake, and you're inside
The coroner's van is your next ride
As Pietro contributed, Steve's guns.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |