new ingot moulds

[tallpaul]

just try them first... other than the spatter and that usually scrapes off easy... these are not match grade bullet molds for cryin out loud... I could see the whining like a lil girl who got a knock off barbie if they did not release... maybe

What is the purpose for the gap between cambers? I am assuming cooling?

[Jim Flinchbaugh]

You a PA guy not to many folks out side of this state that know what it is let alone make it, or is it in other states now too? Nothing like a nice thick slice of scrapple with a runny egg and hot sauce on top.

I thought the same thing and had to look at his avatar to see if a location was present as I had not heard the word "scrapple" since I left PA 31 years ago

[LuckyDog]

Scrapple, Puddins, and Lebanon Bologne.


The bologna showed up in RI for a spell. Didn't compete with the Chourico to well, but it was nice while it lasted.


I get several pounds of each when I go to PA to visit the family.

[allen16323]

I thought the same thing and had to look at his avatar to see if a location was present as I had not heard the word "scrapple" since I left PA 31 years ago

Would love to move out the your area, PA is getting pretty dumpy anymore and now adays the heroin problem is everywhere, hear about 2 or 3 each week here in western PA.

[Big Dog]

xxxxx

[Big Dog]

xxxxx

[Big Dog]

xxxxxx

[tallpaul]

well "Barbie" I spent good money on steel to make good ingot moulds and my so-called buddy being a so-called union certified welder screwed them up after I told him to just drop my cut & fitted steel off at my place since he did not have time to weld them

well then just slice the ends off and get a few new angle... no big deal. Likely anyone able to weld to your satisfaction will have the tools to do so. Stop by and I can slice them off on my metal cutting miter saw... I love the saw blade vs a cutting disc I just talked to a fab shop and am gonna have them make 16 pieces of thin channel with a slight angle so the lead drops free... I will angle cut the ends slightly too and hopefully my welding skills suffice
...

[fred2892]

Heres mine, made and used for over 10 years. Made from 1 1/2" angle with a couple of odd gauge sheet welded to the sides. My welds make yours look professional, but they are welded from the rear. Dont worry about the gaps inside the moulds, they will not cause the ingots to stick. Just try yours as it is, it will be fine.