What I hand-load; .380acp; 9mm/9mmR; 38/357mag; 45acp;
223rem(5.56mm); 22-250rem; 243win; 6.5 Grendel; 270 win; 30-30win; 308win; 45-70gov.
on the list to start Loading; 30-06 springfield; 222 rem; 6.5x55 swedish
"You might be a gun nut if you load 45-70 on a progressive press" -HICKOK45<- was he talking about me!?!
---
Si vis pacem, para bellum _________________ ΜΟΛΩΝ ΛΑΒΕ
cool. I have this same sight on my 50 cal encore barrel. I like mine very much ... hope you enjoy yours as well.
Nice BD gift. Bigted; Great little sights, but mine always seem to loosen up. Any tricks to keeping them tight with out stripping the threads. Compared to your caliber I have them on 22LR, 45Auto and 223AI.
WGRS from Williams. Good sight where you set it and forget it.
I've wanted to do the same for my encore. I can't decide between the williams or the x s sight system. Congrats on the new rifle.
Mark#35
How does that sight mount?????
Feedback link
http://castboolits.gunloads.com/show...ght=AlaskanGuy
What I hand-load; .380acp; 9mm/9mmR; 38/357mag; 45acp;
223rem(5.56mm); 22-250rem; 243win; 6.5 Grendel; 270 win; 30-30win; 308win; 45-70gov.
on the list to start Loading; 30-06 springfield; 222 rem; 6.5x55 swedish
"You might be a gun nut if you load 45-70 on a progressive press" -HICKOK45<- was he talking about me!?!
---
Si vis pacem, para bellum _________________ ΜΟΛΩΝ ΛΑΒΕ
I always put some blue 'locktight' on the threads of anything I mount on the exterior of any weapon. seems like maybe an overkill but you only have to have a sight go stupid once and trace it back to the lose mounting screws and you will always remember to use the 'blue stuff'.
I like this sight so much ... I really wish they would make an exact one for my marlin levers.
I use the 'green stuff' on my gear. Loctite 290 post assembly medium grade wicking thread locker. Good stuff.
"Of all the things I've lost, I miss my mind the most." A. Brilliant
I had one of those on my 250/3000 Encore barrel but decided I needed a peep with more elevation so changed to the other Williams peep. Either way I love a peep with CB's.
FWIW, Williams makes a WGRS for the Marlin 336/1895 - the WGRS-336 - which will also fit an 1894, with a bit of rearward hang over, unless the forward set (2) of scope mount prep holes are used ILO the rear set.
Their WGRS-54 will fit most RF rifles with scope mounting grooves on the receiver.
,.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |