My usual blend :
50% beeswax
30% Red, Tacky Lucas High Temp Grease
10% Johnson's Paste Wax
5% Dexron II or Dexron III Trans. Fluid
5% STP Oil Treatment
This is some good stuff !
Here is a photo of the Lucas Red & Tacky # 2 Grease :
The mixture is heated
on low temp setting ( melted very slowly ) on my electric hot plate until all the ingredients are mixed. The mixture is poured through an old T-Shirt, to be certain there are no impurities in the mixture. Then everything is poured into metal pans that have been lubed with Pam Spray Olive Oil.
Once the lube is room temp., it is placed in the freezer. The lube stays in the freezer for 5 hrs., It shrinks and easily falls from the metal mold pans.
I will cut this into 2 " wide strips with a sharp utility knife and place in large gallon size storage bags. I melt my lube and pour it into my 2 lube-sizers.
I hope this is a help to some of you.
By the way........there will be
a lot of shooting that will come from these 2 pieces of bullet lube.
See link below to see how I pour my lube into my lube sizer :
http://castboolits.gunloads.com/showthread.php?t=146302
Ben
And YES, this lube has provided me with some very accurate groups from some of my .30 rifles, here is a 5 shot group shot with the 210 gr. HCB group buy bullet, Ruger # 1 stainless, 308 Win., 18.5 grs. IMR - 4198 :