RepackboxRotoMetals2MidSouth Shooters SupplyWideners
Inline FabricationLoad DataSnyders JerkyTitan Reloading
Lee Precision
Results 1 to 16 of 16

Thread: Lube guru... What's do you think.

  1. #1
    Boolit Bub
    Join Date
    Dec 2011
    Location
    South shore Massachusetts
    Posts
    34

    Lube guru... What's do you think.

    Just got into casting recently and have only been casting for 45 acp. Haven't actually shot any yet because I live in ny and am towards the end of my pistol permit process. I'm antisapating shooting my 1911 as much as I shoot my 12 gauge and 30.06 so I'm stockpiling 45 acp cast boolits.

    Even more recently I have made some boolit lube and I wanted to see what you guys thought about my recipe. In my own stupidity I didn't measure or weigh any ingreedients so I'm estimating here....

    3 parts parafin (green apple candle wax, which smells delicious)
    1 part bees wax
    1 part (maybe even a little less) white lithium Greece
    And a few green crayons crayons.

    The lube is soft enough for me to push my finger into it and gets very soft and messy when I handle it with my fingers being 98 deg. And I can push the boolits out of the lube by the nose and fills the groves well.

    I'm planing to only use the lube for 45 acp at low velocities and wanted to see what you guys thought of my lube recipe. I have heard that you can lube 45 acp with almost anything but wanted to see what you guys thought.

    Thanks fellas.

  2. #2
    Boolit Grand Master


    stubshaft's Avatar
    Join Date
    Apr 2009
    Location
    Southernmost State of the Union
    Posts
    5,923
    Looks okay but I wold add a small amount of Lanolin to make it sticky so it remains in the grooves.
    Old enough to know better, young enough to do it anyway!

    Men who don't understand women fall into two categories: bachelors and husbands!

  3. #3
    Moderator Emeritus

    wiljen's Avatar
    Join Date
    Dec 2006
    Location
    TN
    Posts
    4,525
    3 parts paraffin may have it harder than you wish. Equal parts paraffin and Beeswax might make a bit stickier softer lube.
    Reloading Data Project - (in retirement)
    http://sourceforge.net/projects/reloadersrfrnce/

  4. #4
    Boolit Bub
    Join Date
    Dec 2011
    Location
    South shore Massachusetts
    Posts
    34
    It's some dang sticky stuff as it is. I think it's because the candle wax that I used it fairly soft by itself. Even when I push the boolits out of the lube there are some (1 out of 15 or 20) that have a groove that isn't completely filled out, I can take a piece and push it into the space that is not completely filled out and do so with my fingers. It won't break up just moosh like hard clay.
    Last edited by nwilson1024; 03-03-2012 at 01:53 AM.

  5. #5
    Banned

    Join Date
    Dec 2007
    Location
    soda springs Id.
    Posts
    28,088
    your viscosity sounds fine.
    heat the boolits before lubing that will help them hold the lube better.
    i would have flipped the b-wax to parrafin ratio or at least went 60-40 b-wax to candle.
    it's more temp stable that way.
    if you mush it between your fingers and it goes almost to a liquid thats not enough viscosity.
    it would blow out of a revolver and make a mess.
    you might have it blow back into your pistols chamber and cause problems.
    when working with a new lube i let it sit for a couple of weeks to see what it truly is.
    then lube just a few and shoot them to see how it reacts under heat and pressure in a gun.

  6. #6
    Boolit Master




    41 mag fan's Avatar
    Join Date
    Feb 2008
    Location
    The Cross Roads Of America State
    Posts
    2,695
    Quote Originally Posted by nwilson1024 View Post
    Just got into casting recently and have only been casting for 45 acp. Haven't actually shot any yet because I live in ny and am towards the end of my pistol permit process. Thanks fellas.
    Man, that's really a sad thought, when a person has to wait for a permit to shoot his 45. Just seems unfathomable to me.

    you want to try a very good lube for the 45, try Bens Red. I've use it exclusively, after trying several lubes.
    Very easy to make, and for less than $30, you can make enough to lube thousands of boolits.

  7. #7
    Boolit Bub
    Join Date
    Dec 2011
    Location
    South shore Massachusetts
    Posts
    34
    I know tell me about it. I have purchased it and the gun store has be holding it for me for about 5 months now. In ny they can't give it to me till I have the permit in hand. Unfortunately I have been waiting about 4 months to meet with the judge in my county about the permit. This particular judge wants to meet with every pistol permit that gets issued in his county. Hence the 4 months of back log. But I'm sure I will be getting it soon. They said on average 6 months from start to finish.

  8. #8
    Boolit Master




    41 mag fan's Avatar
    Join Date
    Feb 2008
    Location
    The Cross Roads Of America State
    Posts
    2,695
    Quote Originally Posted by nwilson1024 View Post
    I know tell me about it. I have purchased it and the gun store has be holding it for me for about 5 months now. In ny they can't give it to me till I have the permit in hand. Unfortunately I have been waiting about 4 months to meet with the judge in my county about the permit. This particular judge wants to meet with every pistol permit that gets issued in his county. Hence the 4 months of back log. But I'm sure I will be getting it soon. They said on average 6 months from start to finish.

    That's what I call communisim, socialism, dictatorship, ect ect. I go to the shop up the road, I see I buy, I fill out the stupid paperwork, I walk out with said gun.
    Just unreal to even wait the 3 days for a handgun and have to have a FOID card just to buy like across the river in IL even.

  9. #9
    Boolit Master
    Join Date
    May 2011
    Location
    Northwest corner of Vermont
    Posts
    1,010
    But remember, IL and NY have NO firearms related crime as a result of those very restrictive laws.

    Don't they?

  10. #10
    Boolit Master




    41 mag fan's Avatar
    Join Date
    Feb 2008
    Location
    The Cross Roads Of America State
    Posts
    2,695
    Quote Originally Posted by Alan in Vermont View Post
    But remember, IL and NY have NO firearms related crime as a result of those very restrictive laws.

    Don't they?
    Oh ya...thanks Alan. I just got a mind jog on why I moved east to the next state that borders IL. There was no gun crimes, and I felt very safe and secure

  11. #11
    Boolit Master


    randyrat's Avatar
    Join Date
    Jan 2007
    Location
    North West Wisconsin
    Posts
    2,651
    Quote Originally Posted by nwilson1024 View Post
    It's some dang sticky stuff as it is. I think it's because the candle wax that I used it fairly soft by itself. Even when I push the boolits out of the lube there are some (1 out of 15 or 20) that have a groove that isn't completely filled out, I can take a piece and push it into the space that is not completely filled out and do so with my fingers. It won't break up just moosh like hard clay.
    You need to give it a little "STICK" Lanolin 1 Tbsp per lb should do it..The Paraffin has or is kinda plastic dry (short on words to describe)
    Or using more beeswax as stated may help some also.

    Wait 6 months to buy a gun........I'd be writing my Representatives and everybody I could about that SHAM. I think the trouble is your judge is appointed and is not elected. No body to answer to.

  12. #12
    Boolit Bub
    Join Date
    Dec 2011
    Location
    South shore Massachusetts
    Posts
    34
    Thanks for the table spoon per lb tip. I'll try to track some down. As far as the judge goes, he's one of the better ones in NY. Im a senior at clarkson university in norther ny and I belong to a gun club where the guys have told me in the county the gun club is in the judge won't even consider giving out permits for handguns.... Crazy if you ask me, not sure how true this is but I have heard this personally from 2 different people. The pistol range at the gun club is bar far the least used range. I have only ever seen a handful of people shooting on the pistol range, and never seen two people there at the same time. Be thankfull you don't live in ny. can't wait to get out.

  13. #13
    Boolit Master pdawg_shooter's Avatar
    Join Date
    Mar 2007
    Location
    S.W. kansas east of dodge city
    Posts
    3,008
    Do you suppose we could sell NY back to the Indians? They have all that casino money now.
    45 AUTO! Because having to shoot someone twice is just silly!

  14. #14
    Boolit Bub
    Join Date
    Dec 2011
    Location
    South shore Massachusetts
    Posts
    34
    They certainly have a good chunk of my money.

  15. #15
    Boolit Master
    Join Date
    Mar 2011
    Location
    Kalispell, Montana
    Posts
    1,468
    There's lots of room out here in Montucky.
    Pack yer bags

  16. #16
    Moderator Emeritus / Trusted loob groove dealer

    waksupi's Avatar
    Join Date
    Mar 2005
    Location
    Somers, Montana, a quaint little drinking village,with a severe hunting and fishing problem.
    Posts
    19,415
    Quote Originally Posted by Jim Flinchbaugh View Post
    There's lots of room out here in Montucky.
    Pack yer bags
    Hey! Cut that out!
    The solid soft lead bullet is undoubtably the best and most satisfactory expanding bullet that has ever been designed. It invariably mushrooms perfectly, and never breaks up. With the metal base that is essential for velocities of 2000 f.s. and upwards to protect the naked base, these metal-based soft lead bullets are splendid.
    John Taylor - "African Rifles and Cartridges"

    Forget everything you know about loading jacketed bullets. This is a whole new ball game!


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check