I was thinking of buying the Lee .360" diameter black powder mold to use as a mold for 00 buckshot pellets. It's 36 caliber just like 00 buck. This should work shouldn't it?
http://www.midwayusa.com/viewProduct...tNumber=128396
I was thinking of buying the Lee .360" diameter black powder mold to use as a mold for 00 buckshot pellets. It's 36 caliber just like 00 buck. This should work shouldn't it?
http://www.midwayusa.com/viewProduct...tNumber=128396
It will work as buckshot, but it is a bit bigger than 00 buck.
Lee has just come out with a mold for 00 buck that casts 18 (I think it is) at a time. Now we're cookin' with gas!
Do we have any idea when that will be hitting the stores? I have yet to find it any place other than the lee site
Here it is at Lee's site: http://www.leeprecision.com/cgi/cata...w.html#shotgun
If you take a dog which is starving and feed him and make him prosperous, that dog will not bite you. This is the primary difference between a dog and a man.
http://leeprecision.com/cgi/catalog/...w.html#shotgun
To answer Walker's question, I have not looked for it elsewhere, but I like Graf's, and usually if it's a Lee product I don't see at Graf's, they have it or can get it, for somewhat less than the Lee price.
http://www.leeprecision.com/cgi/cata...w.html#shotgun
Scroll down the page
Thanks guys!
The following has them a little cheaper than Lee.
http://www.titanreloading.com/18-cav...ot-bullet-mold
00 = .36?
I thought 000 = .36 00 = .33 and 0 = around .32
I'd go with the .319 mold. Fits in shot cups better. You can still call it 00 since it is within saami speck of .33+/- .015".
They can take my guns when they get past my IED's.
I bought one of the Lee buckshot molds last week. They are shipping them now, I received mine in a couple of days. Only used it once so far. Have to find the right temp/alloy to fill out. Got it to work ok, not 100%. Am convinced it will work with the right conditions.
Don
I've been using the .310 roudnd ball mold for a few years. Works great as either buckshot or for lightweight plinking out of .30 cal rifles. Definitely interested in that new Lee mold.
Who makes the .319 RB mould? Lee?
Group Buy Honcho for: 9x135 Slippery, 45x200 Target (H&G68), 45x230 Gov't Profile, 44x265 Keith
E-mail or PM me if you have one of the following commemorative Glocks you'd like to sell: FBI 100yr, Bell Helo, FOP Lodge1, Kiowa Warrior, SCI, and any new/unknown-to-me commemoratives.
Yes ! 000 = .360, 00=.330 BvT
Every lawbreaker we allow into our nation, or tolerate in our citizen population leads to the further escalation of law breaking of all kinds and acceptance of evil.
Since almost all aspects of our cultural existence are LIBERAL in most states, this means that the nation is on a trajectory to dissolution by the burden of toleration and acceptance of LAWBREAKING as a norm, a trajectory back to the dark ages of history.
BvT
... Federal 000B pellets run .345"
... Remington 00B measure .325"
... Rio 00B tops out at .340"
...Winchester # 1B slips in at .290"
...check the rest yourself!
Last edited by RMc; 12-22-2010 at 04:07 PM.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |