Any interest in a 40 cal/10mm 200gr pistol mold?

kamikaze1a · 10-17-2009, 06:08 PM

Looking for others who might want to get in on a multi cavity 40/10mm 200gr TC mold. It won't have a crimp groove since it would be intended for SV/STI shooters. Probably have a bevel base and slightly lower lube groove for loading long with the 40. Any interest? Please post if you are...

richbug · 10-18-2009, 05:20 AM

Are you a member over on the Brian Enos Forums? I just lurk there.

It would certainly be worth mentioning there.

technetium-99m · 10-18-2009, 09:40 AM

You've got my interest, I'd buy 1 or 2.

kamikaze1a · 10-18-2009, 12:30 PM

Quote:

Originally Posted by richbug

Are you a member over on the Brian Enos Forums? I just lurk there.

It would certainly be worth mentioning there.

Great idea! Will do tomorrow...3 down, 12 to go!

pigfixer · 10-18-2009, 10:14 PM

would you have any pictures of the design ?
I would also be interested in a 147 multi cavity mold for a 38/357/38 super in a pointed round nose or TC.
Do you know of any available ?

Thanks Glenn
ps I saw your post on the BE forum.

richbug · 10-19-2009, 03:50 AM

Is the one currently on the table. Min load length would be 1.13", slippery shape for feed challenged guns. As the drawing sits now, it should allow 1.20" in a non-throated chamber.

It is subject to modification as the group sees fit.

kamikaze1a · 10-19-2009, 07:50 PM

Quote:

Originally Posted by pigfixer

would you have any pictures of the design ?
I would also be interested in a 147 multi cavity mold for a 38/357/38 super in a pointed round nose or TC.
Do you know of any available ?

Thanks Glenn
ps I saw your post on the BE forum.

You missed that GB by a hair. The orders where shipped and received last week... Lyman has a 4 cavity for about what we paid for that 6 bagger....

pigfixer · 10-20-2009, 07:37 AM

Could you tell me who made the mold, and any other info about it.
Would it be possible the maker would have an extra one, or would anyone care to sell one, if they bought more than one ?
Thanks all.
Glenn
What Lyman mold # are you referring to as far as the four cavity mold ?

richbug · 10-20-2009, 07:47 AM

http://www.midwayusa.com/viewProduct...tNumber=743639

I imagine this is what he was thinking of.

richbug · 10-20-2009, 07:50 AM

Saeco has a couple sorta pointed RN's, at 145 and 150 gr. But at $145+

http://www.midwayusa.com/viewProduct...tNumber=272180

kamikaze1a · 10-20-2009, 11:11 AM

Quote:

Originally Posted by pigfixer

Could you tell me who made the mold, and any other info about it.
Would it be possible the maker would have an extra one, or would anyone care to sell one, if they bought more than one ?
Thanks all.
Glenn
What Lyman mold # are you referring to as far as the four cavity mold ?

Glenn,

As for the 9mm mold, checkhere. MP Molds out of Europe. Really great work and we got it fast.

Richbug linked you to the Lyman I was referring to. I was going to buy that 4 cavity Lyman when I found out about the MP 6 cavity.

pigfixer · 10-21-2009, 12:41 PM

thanks everyone for all your help.

Glenn

h1tdk00 · 10-29-2009, 02:02 PM

I might be interested in this mold. I just bought some of the Bear Creek 200 grain bullets to try. If I decide I like them I would buy 2 of these molds if the price is right.

Pigfixer, I was in on the 147 gr. 9mm group buy and bought 2 molds for myself and one for a friend. I'm not sure if he is going to take his now, so I might have one for sale. If you are interested, let me know.

Tim

richbug · 10-29-2009, 04:57 PM

Can someone change the title of this thread to reflect that it is for a 40cal/10mm? Some folks might cruise right over it assuming it was for the usual 45/44/41's.

no_1 · 10-29-2009, 05:11 PM

Done.

Robert

jimgun · 10-29-2009, 05:50 PM

you can count me in for a 5 cavity on this one and I would probably be interested in a hp pin also. any idea of who is going to make them? I am very happy with everything I have received from swede aka noe. thanks jim

kamikaze1a · 10-31-2009, 07:48 PM

Quote:

Originally Posted by jimgun

you can count me in for a 5 cavity on this one and I would probably be interested in a hp pin also. any idea of who is going to make them? I am very happy with everything I have received from swede aka noe. thanks jim

That's not been determined yet...so far not enough interest to even get beyond the discussion level. To get a decent price we probably need 10-12 molds.

pigfixer · 10-31-2009, 11:31 PM

I mite be interested, would like to see pictures and would not want a HP.
If I go for it I'd want a 4 to 6 cavity mold, but need info on pricing and wait time.
I'd also be in for something a little lighter, if the final mold hasn't been decided.
Thanks
Glenn

kamikaze1a · 11-02-2009, 04:06 PM

Quote:

Originally Posted by pigfixer

I mite be interested, would like to see pictures and would not want a HP.
If I go for it I'd want a 4 to 6 cavity mold, but need info on pricing and wait time.
I'd also be in for something a little lighter, if the final mold hasn't been decided.
Thanks
Glenn

There are existing 4 and 6 cavity molds that drop bullets less than 200gr available from RCBS/Lyman/Lee right now. And probably for less $$$ too.

We're pursuing this custom mold because none of the manufacturers have a high volume (4-6 cavity), 200gr mold with this profile in their product line.

RANGER RICK · 11-02-2009, 08:40 PM

Very interested , still listening

RR

10-17-2009, 06:08 PM	#1
kamikaze1a Boolit Master Join Date: Apr 2008 Posts: 282	Any interest in a 40 cal/10mm 200gr pistol mold? Looking for others who might want to get in on a multi cavity 40/10mm 200gr TC mold. It won't have a crimp groove since it would be intended for SV/STI shooters. Probably have a bevel base and slightly lower lube groove for loading long with the 40. Any interest? Please post if you are...

10-18-2009, 10:14 PM	#5
pigfixer Boolit Mold Join Date: Aug 2009 Posts: 10	200 grain 40/10 would you have any pictures of the design ? I would also be interested in a 147 multi cavity mold for a 38/357/38 super in a pointed round nose or TC. Do you know of any available ? Thanks Glenn ps I saw your post on the BE forum.

10-20-2009, 07:37 AM	#8
pigfixer Boolit Mold Join Date: Aug 2009 Posts: 10	38 cal. round nose Could you tell me who made the mold, and any other info about it. Would it be possible the maker would have an extra one, or would anyone care to sell one, if they bought more than one ? Thanks all. Glenn What Lyman mold # are you referring to as far as the four cavity mold ?

10-29-2009, 05:11 PM	#15
no_1 Moderator & Sponsor Coordinator Join Date: Mar 2005 Location: S.E. USA Posts: 2,052	Done. Robert __________________ WTB or trade for Magma Molds in .35 pistol / rifle & 45 Rifle. Robert NRA Life Member http://www.nra.com/ Gateway Rifle and Pistol Club Life Member http://www.grpc-jax.com/index.htm Friends of the Osceola http://friendsoftheosceola.com

10-31-2009, 11:31 PM	#18
pigfixer Boolit Mold Join Date: Aug 2009 Posts: 10	200 grain 40/10 I mite be interested, would like to see pictures and would not want a HP. If I go for it I'd want a 4 to 6 cavity mold, but need info on pricing and wait time. I'd also be in for something a little lighter, if the final mold hasn't been decided. Thanks Glenn

10-18-2009, 05:20 AM	#2
richbug Boolit Master Join Date: May 2007 Location: Western PA Posts: 591	Are you a member over on the Brian Enos Forums? I just lurk there. It would certainly be worth mentioning there.

10-18-2009, 09:40 AM	#3
technetium-99m Boolit Man Join Date: Sep 2008 Location: Oklahoma City, OK Posts: 105	You've got my interest, I'd buy 1 or 2.

10-19-2009, 03:50 AM	#6
richbug Boolit Master Join Date: May 2007 Location: Western PA Posts: 591	Is the one currently on the table. Min load length would be 1.13", slippery shape for feed challenged guns. As the drawing sits now, it should allow 1.20" in a non-throated chamber. It is subject to modification as the group sees fit.

10-20-2009, 07:47 AM	#9
richbug Boolit Master Join Date: May 2007 Location: Western PA Posts: 591	http://www.midwayusa.com/viewProduct...tNumber=743639 I imagine this is what he was thinking of.

10-20-2009, 07:50 AM	#10
richbug Boolit Master Join Date: May 2007 Location: Western PA Posts: 591	Saeco has a couple sorta pointed RN's, at 145 and 150 gr. But at $145+ http://www.midwayusa.com/viewProduct...tNumber=272180

10-21-2009, 12:41 PM	#12
pigfixer Boolit Mold Join Date: Aug 2009 Posts: 10	thanks everyone for all your help. Glenn

10-29-2009, 02:02 PM	#13
h1tdk00 Boolit Bub Join Date: May 2008 Posts: 26	I might be interested in this mold. I just bought some of the Bear Creek 200 grain bullets to try. If I decide I like them I would buy 2 of these molds if the price is right. Pigfixer, I was in on the 147 gr. 9mm group buy and bought 2 molds for myself and one for a friend. I'm not sure if he is going to take his now, so I might have one for sale. If you are interested, let me know. Tim

10-29-2009, 04:57 PM	#14
richbug Boolit Master Join Date: May 2007 Location: Western PA Posts: 591	Can someone change the title of this thread to reflect that it is for a 40cal/10mm? Some folks might cruise right over it assuming it was for the usual 45/44/41's.

10-29-2009, 05:50 PM	#16
jimgun Boolit Bub Join Date: Jun 2009 Location: Pa Posts: 23	you can count me in for a 5 cavity on this one and I would probably be interested in a hp pin also. any idea of who is going to make them? I am very happy with everything I have received from swede aka noe. thanks jim

11-02-2009, 08:40 PM	#20
RANGER RICK Boolit Master Join Date: Mar 2005 Location: HOMER ALASKA,TYRANNOSAURUS THUMPER'S Posts: 369	Very interested , still listening RR __________________ PRACTICE DOES NOT MAKE PERFECT !!! PERFECT PRACTICE MAKES PERFECT !!!!!! HOME OF THE 500 MAGNUM TYRANNOSAURUS THUMPER'S......... USS SARATOGA CV-60