311-165Gr. RF (RD Type) Buy starts here,

SwedeNelson · 05-27-2009, 06:54 PM

For information on this buy see the “Ranch Dog Poll ” thread.

311-165Gr GC RF

This is how N.O.E. is going to run our group buy.

We get 15 members to post on this thread that they want a mould.
You can ether post a “I want” on this thread, PM me or E-mail me
at pbsco1@qwestoffice.net.

Will post a running list of user name and how many cavities / options.
When we get 15 on the list the order will go in for the tooling.
It takes two to three weeks for the tooling to get in.
We will keep the buy open until the tooling gets in.

At that time we will close the buy and ask you to send in your
payment.

It will take another one to two weeks to run the moulds.

Prices will be as follows:
Single cavity mould $68.00 Ea.
Double cavity mould $72.00 Ea.
Three cavity mould $79.00 Ea.
Four cavity mould $85.00 Ea.
Five cavity mould $92.00 Ea.
Plus Shipping/Handling.
Prices are subject to change at any time.

You can mix number of cavities in an order to make 15.
We can cut gas checked and non gas checked cavities
in the same mould if the bullet is designed for it.

Use LEE Commercial 6-Cavity handles (not included).
Lyman, RCBS type top punch furnished with each mould
as well as a sample of Bull Plate sprue plate lube.

Hollow pointing one cavity and furnishing a double
ended pin would be $35.00 Extra.

We will accept Checks, Money Orders and Pay-Pal
Pay-Pal requires a 3% sir-charge.

Our mailing address is:
Night Owl Enterprises
1645 W 150 N
Provo, Utah 84601
801 377-7289

Zip code list
31545
34655
55417
12404
56433
15840
72206
96055
17701
21787
68005
98597
81403
68601
64734
DH3 2AY
12586
93610
16678
98030
84057
66227
53132
58703
4817 Australia
47711
99503
85748
45013

Thank you for your interest in this buy.
Swede Nelson

SwedeNelson · 05-27-2009, 06:55 PM

The following have voted to buy in the "Ranch Dog Poll"
Please confirm and post your order here. (number of cavities)
1 - btroj 4 Cavity
2 - calkar 4 Cavity
3 - JesterGrin
4 - jimkim
5 – jtaylor1960 2 Cavity (1 GC, 1 PB)
6 –
7 -
8 – kfarm 2 Cavity
9 – largom 2 Cavity with 1 hollow point
10 - rockrat 5 Cavity
11 - RugerFan 4 Cavity
12 – Slow Elk 45/70 5 Cavity with 1 hollow point
13 - softpoint
14 - stubshaft
15 - timberlost

New orders from this thread.
16 - kennethF 4 Cavity with 1 hollow point
17 - 870TC 4 Cavity
18 -
19 - nighthunter 3 Cavity with 1 hollow point
20 - Vly 3 Cavity
21 - Herdis 5 Cavity
22 - auzzie101 5 Cavity
23 - Jameslovesjammie 1 Cavity with 1 hollow point
24 - articbreeze 3 Cavity
25 - DaveD 3 Cavity with 1 hollow point
26 - kir kenix 3 cavity (2PB, 1GC)
27 - Outdoors 5 cavity (2PB, 3GC)
28 - dromia 4 cavity
29 - ddeaton 5 cavity
30 - wilddog45 2 cavity with hollow point
31 - vernz 4 cavity
32 - hicard 2 cavity 1 PB, 1GC with hollow point
33 - texasboar (2) 2 cavity
34 - kbstenberg 4 cavity
35 - Suo Gan 4 cavity
36 - 15bobcat 1 cavity w/HP
37 - timbuck 4 cavity (2GC, 2PB)
38 - Simon L 4 cavity

Swede Nelson

rockrat · 05-27-2009, 07:01 PM

5 cavity

Gas checked version please

btroj · 05-27-2009, 07:25 PM

4 cavity

RugerFan · 05-27-2009, 11:39 PM

4 Cav

hicard · 05-28-2009, 05:55 AM

Are these moulds aluminum?

SwedeNelson · 05-28-2009, 06:35 AM

Hicard

Yes Sir.

Swede Nelson

KennethF · 05-28-2009, 12:10 PM

SwedeNelson, put me on the list for a 4 cavity mould with one HP cavity. Thanks.

Kenneth Fackrell
Orem, Utah

largom · 05-28-2009, 03:05 PM

Confirm: 2 cavity with one HP

kfarm · 05-28-2009, 06:53 PM

I'd like to confirm a 2 cavity but with NO HP please
Thanks this is gonna be a thumper.
Carroll

Slow Elk 45/70 · 05-29-2009, 12:48 AM

Swede , Confirm #12 , Please change to 5 cav-1 HP , Thank You Slow Elk 45/70

jtaylor1960 · 05-29-2009, 04:03 PM

Make mine 2 cavity with one gas check and one plain base.

BHLUA · 05-31-2009, 12:58 AM

I will take a 5 cavity in this one sweede instead on the other i cancenled on after finding the .314 would work for my sks that i PM'ed you about tonight. I need this one so I want for for sure. PM me ith details

BHLUA · 05-31-2009, 12:59 AM

Put me IN FOR ONE!!!!!!!!!!!! 5 cavity

nighthunter · 05-31-2009, 10:56 AM

Swede ... Put me in for a 3 cavity, 1 cavity hollow pointed and all 3 cavaties gas checked. Let me know who to pay and when to pay.

Nighthunter

Vly · 05-31-2009, 03:33 PM

Hello - I was not in on your poll, but I will buy a 3 cavity, gas checked version.

auzzie101 · 06-03-2009, 07:10 AM

I'm in on this one. 5 cavity w/gas checks please.

kbstenberg · 06-05-2009, 04:54 PM

Don't forget me , 4 cav GC , No HP
Are you going to have a lever to make sprue cutting easier. Like on the Lee 6 holler.

SwedeNelson · 06-05-2009, 08:06 PM

15 orders.
Will get the tooling going on this one Monday.
Will keep the buy open until we get the tooling in.

The sprue plate is a standard plate with no lever.

If you are on the list above, want a mould and havent
confirmed your order please do so soon.

Thanks for the orders.
Swede Nelson

calkar · 06-05-2009, 09:59 PM

four cavity please!!

05-27-2009, 06:55 PM	#2
SwedeNelson Made in U.S.A. Join Date: Mar 2005 Location: Provo, Utah Posts: 1,061	The following have voted to buy in the "Ranch Dog Poll" Please confirm and post your order here. (number of cavities) 1 - btroj 4 Cavity 2 - calkar 4 Cavity 3 - JesterGrin 4 - jimkim 5 – jtaylor1960 2 Cavity (1 GC, 1 PB) 6 – 7 - 8 – kfarm 2 Cavity 9 – largom 2 Cavity with 1 hollow point 10 - rockrat 5 Cavity 11 - RugerFan 4 Cavity 12 – Slow Elk 45/70 5 Cavity with 1 hollow point 13 - softpoint 14 - stubshaft 15 - timberlost New orders from this thread. 16 - kennethF 4 Cavity with 1 hollow point 17 - 870TC 4 Cavity 18 - 19 - nighthunter 3 Cavity with 1 hollow point 20 - Vly 3 Cavity 21 - Herdis 5 Cavity 22 - auzzie101 5 Cavity 23 - Jameslovesjammie 1 Cavity with 1 hollow point 24 - articbreeze 3 Cavity 25 - DaveD 3 Cavity with 1 hollow point 26 - kir kenix 3 cavity (2PB, 1GC) 27 - Outdoors 5 cavity (2PB, 3GC) 28 - dromia 4 cavity 29 - ddeaton 5 cavity 30 - wilddog45 2 cavity with hollow point 31 - vernz 4 cavity 32 - hicard 2 cavity 1 PB, 1GC with hollow point 33 - texasboar (2) 2 cavity 34 - kbstenberg 4 cavity 35 - Suo Gan 4 cavity 36 - 15bobcat 1 cavity w/HP 37 - timbuck 4 cavity (2GC, 2PB) 38 - Simon L 4 cavity Swede Nelson __________________ More people die from worrying about getting ate by a bear then get ate by a bear. HARD TO FIND GEW 88 PARTS http://www.gunloads.com/fam/swedenelson/album2.htm Made in the U.S.A. We take Pay-Pal Last edited by SwedeNelson; 07-01-2009 at 06:50 AM. Reason: 32 orders

05-27-2009, 07:01 PM	#3
rockrat Boolit Master Join Date: Aug 2005 Posts: 816	5 cavity Gas checked version please Last edited by rockrat; 06-03-2009 at 08:45 AM.

05-27-2009, 11:39 PM	#5
RugerFan Cast Hunter Join Date: Mar 2005 Location: S. Georgia Posts: 1,101	4 Cav __________________ "We hold these truths to be self-evident, that all men are created equal, that they are endowed by their Creator with certain unalienable Rights, that among these are Life, Liberty and the pursuit of Happiness." - The Declaration of Independence, 4 July 1776

05-28-2009, 06:35 AM	#7
SwedeNelson Made in U.S.A. Join Date: Mar 2005 Location: Provo, Utah Posts: 1,061	Hicard Yes Sir. Swede Nelson __________________ More people die from worrying about getting ate by a bear then get ate by a bear. HARD TO FIND GEW 88 PARTS http://www.gunloads.com/fam/swedenelson/album2.htm Made in the U.S.A. We take Pay-Pal

05-29-2009, 12:48 AM	#11
Slow Elk 45/70 Boolit Master Join Date: Feb 2009 Location: Clear, AK Posts: 1,285	Swede , Confirm #12 , Please change to 5 cav-1 HP , Thank You Slow Elk 45/70 __________________ Slow Elk 45/70 Praise the Lord & Pass the Ammo

05-27-2009, 06:54 PM	#1
SwedeNelson Made in U.S.A. Join Date: Mar 2005 Location: Provo, Utah Posts: 1,061	311-165Gr. RF (RD Type) Buy starts here, For information on this buy see the “Ranch Dog Poll ” thread. 311-165Gr GC RF This is how N.O.E. is going to run our group buy. We get 15 members to post on this thread that they want a mould. You can ether post a “I want” on this thread, PM me or E-mail me at pbsco1@qwestoffice.net. Will post a running list of user name and how many cavities / options. When we get 15 on the list the order will go in for the tooling. It takes two to three weeks for the tooling to get in. We will keep the buy open until the tooling gets in. At that time we will close the buy and ask you to send in your payment. It will take another one to two weeks to run the moulds. Prices will be as follows: Single cavity mould $68.00 Ea. Double cavity mould $72.00 Ea. Three cavity mould $79.00 Ea. Four cavity mould $85.00 Ea. Five cavity mould $92.00 Ea. Plus Shipping/Handling. Prices are subject to change at any time. You can mix number of cavities in an order to make 15. We can cut gas checked and non gas checked cavities in the same mould if the bullet is designed for it. Use LEE Commercial 6-Cavity handles (not included). Lyman, RCBS type top punch furnished with each mould as well as a sample of Bull Plate sprue plate lube. Hollow pointing one cavity and furnishing a double ended pin would be $35.00 Extra. We will accept Checks, Money Orders and Pay-Pal Pay-Pal requires a 3% sir-charge. Our mailing address is: Night Owl Enterprises 1645 W 150 N Provo, Utah 84601 801 377-7289 Zip code list 31545 34655 55417 12404 56433 15840 72206 96055 17701 21787 68005 98597 81403 68601 64734 DH3 2AY 12586 93610 16678 98030 84057 66227 53132 58703 4817 Australia 47711 99503 85748 45013 Thank you for your interest in this buy. Swede Nelson __________________ More people die from worrying about getting ate by a bear then get ate by a bear. HARD TO FIND GEW 88 PARTS http://www.gunloads.com/fam/swedenelson/album2.htm Made in the U.S.A. We take Pay-Pal Last edited by SwedeNelson; 07-24-2009 at 11:45 AM. Reason: added Zip Code list

05-27-2009, 07:25 PM	#4
btroj Boolit Man Join Date: May 2006 Posts: 117	4 cavity

05-28-2009, 05:55 AM	#6
hicard Boolit Master Join Date: Jan 2007 Location: Northern Kalifornia Posts: 651	Are these moulds aluminum?

05-28-2009, 12:10 PM	#8
KennethF Boolit Bub Join Date: Nov 2008 Posts: 44	SwedeNelson, put me on the list for a 4 cavity mould with one HP cavity. Thanks. Kenneth Fackrell Orem, Utah

05-28-2009, 03:05 PM	#9
largom Boolit Master Join Date: Jul 2008 Location: Taneytown, Maryland Posts: 826	Confirm: 2 cavity with one HP

05-28-2009, 06:53 PM	#10
kfarm Boolit Buddy Join Date: Dec 2008 Location: Central Arkansas Posts: 57	I'd like to confirm a 2 cavity but with NO HP please Thanks this is gonna be a thumper. Carroll

05-29-2009, 04:03 PM	#12
jtaylor1960 Boolit Master Join Date: Sep 2005 Posts: 311	311 rd mold Make mine 2 cavity with one gas check and one plain base.

05-31-2009, 12:58 AM	#13
BHLUA Banned Join Date: May 2009 Location: Deep south Posts: 45	I will take a 5 cavity in this one sweede instead on the other i cancenled on after finding the .314 would work for my sks that i PM'ed you about tonight. I need this one so I want for for sure. PM me ith details

05-31-2009, 12:59 AM	#14
BHLUA Banned Join Date: May 2009 Location: Deep south Posts: 45	Put me IN FOR ONE!!!!!!!!!!!! 5 cavity

05-31-2009, 10:56 AM	#15
nighthunter Boolit Master Join Date: Mar 2005 Location: Near DuBois PA Posts: 813	Swede ... Put me in for a 3 cavity, 1 cavity hollow pointed and all 3 cavaties gas checked. Let me know who to pay and when to pay. Nighthunter __________________ IN GOD WE TRUST ...... ALL OTHERS PAY CASH.

05-31-2009, 03:33 PM	#16
Vly Boolit Master Join Date: Mar 2005 Location: Hudson Valley of New York State Posts: 241	Hello - I was not in on your poll, but I will buy a 3 cavity, gas checked version.

06-03-2009, 07:10 AM	#17
auzzie101 Boolit Bub Join Date: May 2007 Location: SW Washington Posts: 44	I'm in on this one. 5 cavity w/gas checks please.

06-05-2009, 04:54 PM	#18
kbstenberg Boolit Master Join Date: Apr 2009 Location: northern Minn. in the boonies Posts: 495	Don't forget me , 4 cav GC , No HP Are you going to have a lever to make sprue cutting easier. Like on the Lee 6 holler.

06-05-2009, 08:06 PM	#19
SwedeNelson Made in U.S.A. Join Date: Mar 2005 Location: Provo, Utah Posts: 1,061	15 orders. Will get the tooling going on this one Monday. Will keep the buy open until we get the tooling in. The sprue plate is a standard plate with no lever. If you are on the list above, want a mould and havent confirmed your order please do so soon. Thanks for the orders. Swede Nelson __________________ More people die from worrying about getting ate by a bear then get ate by a bear. HARD TO FIND GEW 88 PARTS http://www.gunloads.com/fam/swedenelson/album2.htm Made in the U.S.A. We take Pay-Pal Last edited by SwedeNelson; 06-05-2009 at 09:01 PM.

06-05-2009, 09:59 PM	#20
calkar Boolit Man Join Date: Jan 2007 Posts: 90	four cavity please!!