Howdy,
Does anyone out there have any experience with, or knowledge of the Euroarms, 1803 Harpers Ferry rifle?
John
Howdy,
Does anyone out there have any experience with, or knowledge of the Euroarms, 1803 Harpers Ferry rifle?
John
im not real sure about your m/l but i think it was made by one of three spaggetti imports chiapa , pedratti , or armi sport , i have seen a couple at rondevue and while the gun itself seems to be pretty decent , the locks are a differant story and most need a fair bit of tweaking to be made reliable and some can have a realy stout trigger that takes 3 men and a small boy to pull , now with that being said , most times the prices on these guns are usualy better than reasonable and wont cost a lot to make reliable , and lets not forget how much fun youll have shooting it
Early ones were 58 cal instead of 54. don't know if they used a Zouave type barrel or not.
Northmn
Knowledge I take to my grave is wasted.
I prefer to use cartridges born before I was.
Success doesn't make me happy, being happy is what allows me to be successful.
The Euroarms rifles seem to have a history of lock problems. I know fellows who have changed out the parts and replaced them with Siler parts. This will allow you to keep the orginal lock plate. The frizzen have to be heat treated or replaced. After all that time and expense you can expect a damn good shoot'in rifle. I have seen these worked over guns win many Primitive and large bore matches.
I just found this old thread; hope you guys are all still breathing.
Took my Euroarms 1803 out to the range today and finally, after many earlier, frustrating shooting sessions, I got it to hit the paper at 25 yards. Realized that the sights are very far off, but now I finally had a reference point. I eventually got the bull's eye using extreme Kentucky windage.
On the question of Eurarms locks: my flint stopped sparking on the frizzen after twelve or so shots, and for all I could do, I never managed to get a final spark out of her and had to pull out the flint and pack up the rifle with a charge still in the barrel, for the rangemaster was determined to shoo me out at closing time, 5:00 pm on the dot, come hell or high water.
I would recommend that anyone shooting one of these contraptions have a supply of emergency firecracker fuse in his shooting box so that he can touch off that last, stubborn round.
Bill 54
Or convert it to caplock just sayin.
I have a Zoli it has the three grove rifling made on the same machine that rifled the zuolve barrels. never had a problem with the lock andit shoots a .562 round ball with a .020 patch just fine.
Last edited by bob208; 06-17-2019 at 08:34 PM.
Gotta love those patch's soaked in " BEAR OIL/ED "
Just shovelin it a lil ... nuttin personal ...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |