Looks like a .22 Cadet, BSA I have one like it all original. Pecatonica River longrifle supply makes all kinds of stocks, out of quality wood and great prices. They have them or can make them for this rifle, just go to their website.
Keep an eye out on FleaBay for an Australian Martini Cadet forearm, it will fit. What you have there is most likely a BSA 12/15 rifle. Be advised: the BSA International rifles parts will not interchange. This link will assist in your quest for knowledge:
http://www.adamsguns.com/martini.htm
Nice find, by the way! Shooting clay pigeons at 50yds isn't even challenging!
Rights, and Privileges, are not synonymous. We have the Right to Bear Arms. As soon as the Government mandates firearm registration, and permiting, then that Right becomes a Privilege, and may be taken away at our Master's discretion.
Looks like it might be a #12 model as the barrel is short for a 12/15. If the serial number starts with a P then its a 12/15 that someone put a straight stock on and trimmed 4 inches off the barrel.
Ya just gotta LOVE small frame Martinis!
Rights, and Privileges, are not synonymous. We have the Right to Bear Arms. As soon as the Government mandates firearm registration, and permiting, then that Right becomes a Privilege, and may be taken away at our Master's discretion.
I guess a Model 12 from the 1930's. The action should have thicker walls than the Cadet. The 12/15 had a pistol grip stock.
https://www.rifleman.org.uk/BSA_smal...et_rifles.html
Hold Still Varmint; while I plugs Yer!
Forgot to mention its a take down with a S/N 379xx no prefix
Yep if it's a take down it's a model 12. I thought that was a take down screw on the receiver but at the distance the picture was taken I wasn't sure.
If you have 6" of straight tube at the action making a forend is fairly simple. 1 1/2" block of matching wood, 8-10" long. Cut a 3/4 barrel channeled down the middle end to end. Drill and tap two 6x48 holes bottom dead center, through the rough forend, held by clamps. counter bore a 222 case, cut off and make an escutions from the base. Glass bed the forend to the barrel. Take a paper thickness off he forend at the action so they do not touch. Form and finish to match the butt stock.
This is my 222R w English walnut wood, they take 541 scope bases.
“There is a remedy for all things, save death.“
Cervantes
“Never give up, never quit.”
Robert Rogers
Roger’s Rangers
There are three kinds of men. The one that learns by reading. The few who learn by observation. The rest of them have to pee on the electric fence for themselves.
Will Rogers
Definitely a model 12. There are folks in the UK who sell all sorts of parts for these rifles; they're you're most likely source for original parts. Any aftermarket fore-ends you buy in the US are going to need fitting, shaping and finishing.
I think I might have a forend for you. It's off a BSA target rifle. Send me a PM and I will give you more of a discription. If it's the right one, you can have it free, for the postage. Best regards, the toolman.
The Toolman provided me with a forearm that was a perfect fit so many thanks to a great guy for helping me out
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |