What doesn't kill you makes you stronger - or else it gives you a bad rash.
Venison is free-range, organic, non-GMO and gluten-free
Cast 300+ NOE 480-375- FN boolits. Used to use them in both 470 N.E. and for 480 Ruger. Only do the Ruger infrequently now. Another hundred or so today will give me more than a lifetime supply. Then it will be time to move the mold down the road.
Getting time for a serious reduction in the stuff in the shed, can't find stuff no more. Been looking for an arbor for my wood lathe for 4 days.
I give up, going to buy a new one today
Last edited by 15meter; 01-04-2024 at 07:33 PM.
made up a box of 380 Auto; 95 gr Lee as cast over 2.5 gr Promo, Ginex primers. And also one box of 9mm Para; 356402 over 4.3 gr promo, also Ginex primers. The 9mm I have to add a taper crimp step after seating because my FEG pistol is finicky about feeding.
Wayne
What doesn't kill you makes you stronger - or else it gives you a bad rash.
Venison is free-range, organic, non-GMO and gluten-free
I poured a few hundred RCBS 44-245-SWC's for my 44 Magnum. Loading up most all the brass I have with that bullet and 10 grains of Unique.
Going to have to drill and tap that mold for a sprue cutter bolt set screw as it is driving me crazy constantly loosening and slowing me down.
Started tumbling brass yesterday. Did 4 loads yesterday, 2 hours each, and have the 2nd load running so far today. Hope to do 4 today and finish up tomorrow.
I haven't done anything in a year. I have picked my life up and moved out of the socialist state of Illinois to the free state of Arkansas. I had a "barn" delivered and have been making a loading/ repair shop. Hopefully I will be back at it by June.
The rules of the range are simple at best, Should you venture in that habitat, Don't cuss a man's dog, be good to the cook, And don't mess with a cowboy's hat. ~ Baxter Black
Cast some 40-82’s from 2 new to me Winchester molds. One cast a .405 the other a .408 diameter pill. To finish the pot cast some 405gr hollow base for the trapdoor.
Cast some heavies for the 32WCF. Got through 65 and realized that I had lent the rifle to another lion hunter.
Sent from my Pixel 5 using Tapatalk
turned 1 roll of toilet paper into half a cup of mostly black but ever so slightly brown soot......
Nothing yet, I just got my coffee, and so far turned on the light and the computer, it's going to be a good day though. It might snow, woo hoo blessed!!
De-primed 500 38 Special cases. If I can motivate myself I might go back out and flare them.
Been diligently working up loads looking for accuracy from my new SA Echelon with my MP-136-138-RN NLG BB boolits AA#7 pwd and cci 500 primers. I’m new at this but never been so difficult before. Have gone through most of a lb of pwd so far. Shooting aabout 40 rounds per day since before Christmas. Even moved into 10yds even shot a box or two of Factory to see. They did very well so still trying. And yes did dabble with other pwds with not so much success. Besides I want to make the #7 work. The loads that work quite well won’t cycle well around 850’. Going on into +P territory next and tomorrow breaking out the XDM
I got those 500 38 Special cases flared and primed tonight.
This increased the count for priming with my new RCBS Auto Prime tool to approximately 3,000 primers installed since mid-September. So far, I really like it. Should have bought one years ago. The only problem I've had with it was that the handle pivot bolt loosened at something like 700 primers. I cleaned the threads and retorqued it with Red Loctite and have had no problems with loosening since.
Loaded a couple of hundred 44 Specials to shoot through my Lipseys Flattop.
Old enough to know better, young enough to do it anyway!
Men who don't understand women fall into two categories: bachelors and husbands!
Sorted some brass , inventoried my vintage ammo stash and cleaned up the bench ,getting ready to do a batch of 9mm subs.
Setup a new Win 11 4k ASUS laptop today. been using an iPad for 9 years. Perhaps I can now use 50+ years of data and photos from my PC. Learning IOS from Win was fun now relearning Win from IOS, happy to have a back space. Will be nice to carry my current reloading data from the shop to the house with me.
“There is a remedy for all things, save death.“
Cervantes
“Never give up, never quit.”
Robert Rogers
Roger’s Rangers
There are three kinds of men. The one that learns by reading. The few who learn by observation. The rest of them have to pee on the electric fence for themselves.
Will Rogers
I used the last of my Varget to load a few 6.5x55 Swedish with 140 gr Hornady bullets.
I had a teaspoon left.
I put it on a steel plate and lit it.
Burns slower than I thought!
Sent from my iPhone using Tapatalk
Loaded some of the older AA hulls in 12 gauge. Just amazing how great they crimp.
The worst accuracy I've ever had out of one of my pistols was when trying to load low velocity loads with slow burning powder. For me it was 9mm with Shooters World Major Powder which is equivalent to AA#7.
Same powder shoots very accurately with high velocity loads. I disassembled those low velocity loads and reused the bullets with a fast powder and they were very accurate. Ditch the slow powder for low velocity loads.
Dan Wesson 744V .44mag, S&W Mod 19-4 .357 , Stevens 200 .223
Got 3 new Lee molds. Been awhile since I used any Lee’s since I got on the HP bandwagon. They sure cast well.
I have realized I enjoy casting solid bullets better…
Sent from my iPhone using Tapatalk
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |