Just wondering if anyone else has run into a problem with the Lee auto breech lock pro not seating bullets consistantly.
I will run a case through the stages and get the seating die adjusted to where I like it. Then once I get all four stages occupied it seems to seat bullets inconsistantly. Subsequent bullets are usually seated shallower than the first round I loaded (resulting in a longer OAL).
I think something is happening when all the stations are occupied there is too much resistence when the ram goes up. I tried depriming and sizing all the brass ahead of time to reduce this resistence. It helped some but not enpugh.
Any clever solutions or adjustments that you'd recommend?