Some of you may remember I hit the jackpot back in January or February of this year with a haul of 1500 lbs. of all lead wheel weights and another 500 lbs. of assorted large ingots of lino and tin. Well, That same seller had a lot of stuff left over in the form of ingots and "Scrap" in trash cans and a bunch of lead pipe. I finally found time to go up there today and bout all the rest of the "Scrap" and all the lead pipe. Someone else had already snagged the ingots. I hope if they read this they already know those ingots were mostly wheel weights! So I came home today with 1250 lbs. of lead hoping most of it was dead soft since I already have a bit over a ton of wheel weights. Weeeellllll, No, I have probably 200 lbs. of linotype and another 100 lbs. of what I suspect is tin! I have a bunch of pictures I am going to have to resize to put on here but I am going to need some help with some of this stuff. I had mentioned before that this young man bought all this lead from the estate of an old reloader so it was all good stuff. But the young man did not know what he had so he didn't keep it in order when he picked it up. Some of it is marked obviously and other stuff seems to be coded. I am going to buy a Cabine tree tester and see what I have with that and then decide what to send to BNE. So give me a bit to get the pics ready to go and you will see what I got but meanwhile, what is Gardiner Hexbar? I have 30-40 lbs. of that in short sections.