Just received my first mold from MP mold. Five days from Slovenia to Texas!! It looks absolutely beautiful and precision made. Now if it makes good bullets. We will find out tomorrow.
Just received my first mold from MP mold. Five days from Slovenia to Texas!! It looks absolutely beautiful and precision made. Now if it makes good bullets. We will find out tomorrow.
Congrats. Welcome to the forum flatnose.
If a 41 won't stop it, I wouldn't bet my life on a 44.
Welcome,
you'll like it. Break in, Clean with break cleaner then dawn dish soap and a tooth brush, heat cycle 3 times on a hot plat or oven to 450 degrees and total cool down. Lube the sprue plate and hinge and if you have pins the bars that connect them. This will build patina that will help boolits drop better. Run your alloy hot (750 deg.) the brass moulds have to be run hotter to get good fill out. Enjoy.
Steve,
Life Member NRA
Colorado Rifle Club member
Rocky Mtn Gun Owners member
NAGR member
I have 1 aluminum MP mould but it is a .457 for my ROA. The balls come out at .458 with pure lead. I'm very happy with it.
Steve,
Life Member NRA
Colorado Rifle Club member
Rocky Mtn Gun Owners member
NAGR member
It'll make great boolits. Now you'll be addicted to the MP molds too. Welcome to the club!!!
KE4GWE - - - - - - Colt 1860, it just feels right.
It's getting so, I only like to cast with my 'gold' moulds!
I was able to make a few hundred boolits today with the new MP mold. It works actually better than fantastic. I had to cast a little hotter than I usually do but it makes beautiful boolits. All were very round at .360" which is absolutely perfect to size to .359". Lyman better get it together and update their ancient mold technology or they will be left behind if they are not already. Lyman cant touch most other mold makers. Accurate iron molds are pricey but they are truly the best in my opinion. Anyway MP made a great mold and I know I will enjoy it for a long time. Try one you will like it.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |