That was put together for a 21" carbine length fast twist Green Mountain drop-in Renegade barrel. It started out as a Lyman #445599 minie mold, remachined to make it smooth sided and given an adjustable length plug. The small hollow was intended to be a place to tuck in the tail on the paper patch, but as things ended up it might still be assisting in expansion. Been threatening to try it out in a 48" twist Deerhunter and also a Renegade factory barrel (with lotsa FFFg), but want to try the New Englander for sure. Would like to try out increasing the size of the hollow but there's too many things on my plate as it is.
Last edited by Good Cheer; 07-25-2020 at 07:18 AM.
Don't own a 50 cal. But I do own other cals larger & smaller than the 50.
Allot 50 cal shooters as read like the Lee REAL that is suitable for home casters.
I on the other hand am a old school caster ~ Rd Ball & occasionally the T/c Maxi.
Good luck with you're endeavor sir.
I have a pair of TC Hawkins, 45 & 50. I got both in late 60s. I shot the 50 a good bit at one time, haven’t shot them in 30yrs. At this time round balls were the boolits. Rifle shot very well and only mod I made was to put good sights on it. A few years later Maxi Balls came out. It took 2 men and a boy to get maxi down the bore. I slugged barrel and sent to TC. They offered to replace barrel and said it was at bottom of their tolerance scale. I declined because it shoots balls so well. I have tried other bullets always went back to ball/ patch.
I know this is an older post, but I have two T/C Hawkens with the same barrel as the Renegade. I shoot mostly PRB (took a deer with it this past winter) but also cast Maxi Balls if I want something a bit heavier. If you're still looking for the right fit, I can send you a handful of each so you can give them a try and see if they work for you.
My go to load for the 50 Renagade was 65 gr fffg and a TC MaxiHunter (old style) conical. Very accurate without any wads or cards. Alas, I am out of those boolits as the TC MaxiHunter mold was lost in a move. Maybe someday I'll find another to replace it with. This was a great deer killing combination.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |