I have an "IDEAL" Bullet Lube-sizer which takes the usual Lyman Sizing Dies and Top Punches.
Hoping someone here can maybe tell me which Top Punch numbers for these three Boolits...( Although the .429 and the .360 would look to be so much the same nose wise, I am sure the same Top Punch would do for both ).
Finally got some more Casting done, Woo Hoo! - I know, I need to add some Tin, and I will..! These were pure Lead and were Cast outside on a pretty Cold day.
Top Punches have driven me nuts in general - I have had no luck finding what Top Punch Numbers go to any of the Boolits I Cast. If all else Fails, I can insert a No. 2 Morse Jacobs Chuck in my Wood Lathe Head Stock, and then grip and modify some Top Punches by hand, to suit these...( leaving aside the not fun of Bullet Seating on the Press, since no Dies I have suit these profiles ).
Left to Right -
Ideal or Lyman Mold 429 220
Ideal or Lyman Mold 360 302
Ideal or Lyman Mold 356 472
Hosted on Fotki