Im wondering if anyone uses just straight lino type for boolits? I got a bunch today and usualy make a #2 with it but im thinking this may be pretty good as just a straight boolit alloy for targets.
Im wondering if anyone uses just straight lino type for boolits? I got a bunch today and usualy make a #2 with it but im thinking this may be pretty good as just a straight boolit alloy for targets.
** Please bear with me for a day or two if I dont reply quickly.**
Mike B.
Gun Control= Being able to hit your target.
i have almost 500lbs of lino and have cast lots of .44 and .357 with it.
both of these molds are swc with gas checks.
works best with full power loads so the bullet will upset enough to not let the hot gases pass the bullet. If loaded down, you will actually have more of a problem with leading.
at least this has been my experiance.
hope this help you.
waco
p.s.
not good for a hunting boolit.
too brittle by its self.
Im looking to just cast them for my .300Win.Mag. for punching paper because I already have a great hunting boolit of a softer alloy.
Thank you.
** Please bear with me for a day or two if I dont reply quickly.**
Mike B.
Gun Control= Being able to hit your target.
I've cast a lot of straight linotype boolits. They should work fine for paper punching......and they sure are purdy!
You cannot discover new oceans unless you have the courage to lose sight of the shore
I FEEL about casting straight Linotype boolets about like so many of you do when I recommend drilling and tapping an old Winnie for receiver sights.
And so now you know the r----
Pepe Ray
The way is ONLY through HIM.
In my experience, linotype is fine for punching paper with rifle bullets, however, it is too hard for hunting purposes. The bullets are somewhat brittle, and tend to shatter on game.
I have a couple of cwt on hand usually but rarely use it straight, I find it more cost effective to use it for hardening up softer alloys when needed.
It will make good boolits but fit is crucial.
For fine firearms and shooting requisites visit my Web Site by clicking the link below:
Pukka Bundhooks
Mike, Although you can use the linotype for casting as is, I find it has a better use. It is perfect for taking different alloys and making them harder. If you have some pure lead and want to make some good pistol bullets, no problem, just and some lino.
Shooter of the "HOLY BLACK" SASS 81802 AKA FAIRSHAKE; NRA ; BOLD; WARTHOG;Deadwood Marshal;Bayou Bounty Hunter; So That his place shall never be with those cold and timid souls who neither know victory nor defeat; 44 WCF filled to the top, 210 gr. bullet
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |