I currently don't have a sizing die for the swede, am thinking of loading NOE's bullet as cast using some mule snot. The bullet is .270 at the bands. I have gaschecks.
Anyone have real life experiences to share?
Thanks in advance.
Mark
I currently don't have a sizing die for the swede, am thinking of loading NOE's bullet as cast using some mule snot. The bullet is .270 at the bands. I have gaschecks.
Anyone have real life experiences to share?
Thanks in advance.
Mark
Will the cartridge chamber with the .270 bullet seated in the case?
If so, shoot and give us a report
Mike
Last edited by skeettx; 03-19-2019 at 07:04 PM.
What is the burning rate of mule snot? How much do you plan to reduce the load for the oversize boolit?
I did it with 14 grains of 2400 with Lee liquid lube before I went to Ben's liquid lube and had good luck.
I think Ed Harris did an article on reduced loads using the Lee lube on some of his plinking loads. Might try a search here. May be some info on castpics website. I think that is where I first ran across the info.
Yeeee Hawwww
Shoot her ALOT!!
Mike
NRA Benefactor 2004 USAF RET 1971-95
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |