Well Photobucket it seems now wants about a hundred bucks a year to allow me to post pics! Well they can take that and do you what with it!
Ok maybe this will work so let's try it again!
I have been on this project off/on for over two years but except for a few small items it's about finished now. It will be joining the other two, a much heavier and somewhat modified version also in 45-90 and the scaled down "baby HighWall" in 22 WMR. This one has a standard weight 28" full octagon barrel and I chose a pistol grip stock this time, the first one was intentionally built heavy at a bit over 14 lbs with a 32" heavy weight barrel, thick walled receiver and straight grip stock. This one also has the same mods to the action like the others that eliminates the lower tang retaining screw heads from the receiver sides and also has the highly modified sear on a carrier slotted into the receiver similar to the way the lower tang/trigger group is attached, this eliminates the sear pin ends from showing on the receiver sides just below the hammer plus IMO it works better like this. I made the receiver and breechblock from 4140HT alloy with most of the internal parts being hardened and tempered O1 steel, the receiver is slightly heavier than an original and being made of 4140 it should be really strong.
I made this sight as a copy of the one on my T/C Hawkin ML except I built it with a Dovetail mount instead of the screws that T/C mounts them with,
(That nick in the forearm, top RH side, happened when I bumped the gun case as I removed this thing for these pics but I decided to post them anyway, I will fix that later)