Bought a Remington rifle at a gun-show last week. Bubba put some kind of gold or gold leaf in the "Remington" logo.
I think it looks cheap. Any ideas on how to remove it without sacrificing the bluing?
Bought a Remington rifle at a gun-show last week. Bubba put some kind of gold or gold leaf in the "Remington" logo.
I think it looks cheap. Any ideas on how to remove it without sacrificing the bluing?
Did you try Acetone ?
.
Use acetone or lacquer thinner to soften the paint, and a toothpick to clean out the recess'.
Be sure to put some oil on the metal afterward, as the solvents will remove any rust protection there.
.
Now I lay me down to sleep
A gun beside me is what I keep
If I awake, and you're inside
The coroner's van is your next ride
I had a gun that way. Used Berrymans B-12 carb cleaner (don't get it on the stock!!) and a soft brass bristle brush and took my time.
Will acetone or carb cleaner ruin the bluing?
Won't harm bluing but it will remove any oil/preservative from the surface so reapply after use.
Acetone and carb cleaner will generally damage most wood finishes so be careful not to get any of it on the wood.
They can also damage some plastic and other synthetics.
If you scrubb the surface with acetone using a common toothbrush to remove the 'gold' , you will find that the toothbrushes will start to melt/disolve from the acetone. Quite a mess!
A MilSpec M16 cleaning brush works well, they hold up OK. Or just use a toothpick to agitate the stuff in the stamping cuts as already mentioned.
The use of the kits to enhance markings was quite popular in the 70's,maybe still is.
Gold-Lode & Bonanza Gold are a couple of the popular DIY kits I remember being sold.
Last edited by 2152hq; 11-29-2017 at 01:31 AM.
Swipe someof the Mrs's nail polish (acetone) remover apply it to the gun with a tooth pick and use the pick as a scrub, it'll come off.
"NUTS" A. Clement McAullife
you can get copper pads like stainless steel that will not take off bluing on Amazon
What ever you do try it on a hidden area of the gun first under the stock
The solid soft lead bullet is undoubtably the best and most satisfactory expanding bullet that has ever been designed. It invariably mushrooms perfectly, and never breaks up. With the metal base that is essential for velocities of 2000 f.s. and upwards to protect the naked base, these metal-based soft lead bullets are splendid.
John Taylor - "African Rifles and Cartridges"
Forget everything you know about loading jacketed bullets. This is a whole new ball game!
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |