44 Rossi to 444 conversion?

[JReaper9178]

Is this something that can be done

Sent from my SAMSUNG-SM-G900A using Tapatalk

[MT Gianni]

I believe the model 92 is too short for the 444.

[BCRider]

I don't see a .44Mag break action single shot so I'm guessing you mean the Rossi 92 chambered in .44Mag. That right?

If so yeah, the bolt in the 92 doesn't cycle anywhere near far enough to handle that length of cartridge.

[OlDeuce]

You would need an action that travels app 2.250 to be able to squeeze the .444 in the action!!!You can get the job done with a Winchester '94 action in .44mag

Ol Deuce

[OlDeuce]

That New rolling block is made in 44 mag....that would be a good one to re-chamber to the .444!!! Ol Deuce

[JReaper9178]

I don't see a .44Mag break action single shot so I'm guessing you mean the Rossi 92 chambered in .44Mag. That right?

If so yeah, the bolt in the 92 doesn't cycle anywhere near far enough to handle that length of cartridge.

Rossi does make a single shot break action in 44 mag so no not the model 92.

[RPRNY]

There are still a fair few H&R Handi Rifles in 444 Marlin for sale. see them in GB still. Better rifle than the Rossi, even if they have stopped making them.

But otherwise, yes, it is feasible. Max SAAMI pressure for 44 Mag is 36,000 psi. Max SAAMI pressure for 444 Marlin is 42,000 psi, so, there's a consideration.

[JReaper9178]

There are still a fair few H&R Handi Rifles in 444 Marlin for sale. see them in GB still. Better rifle than the Rossi, even if they have stopped making them.

But otherwise, yes, it is feasible. Max SAAMI pressure for 44 Mag is 36,000 psi. Max SAAMI pressure for 444 Marlin is 42,000 psi, so, there's a consideration.

The thing is with the hand rifle , what about parts , I have run into this before with the ruger old army revolver

[RPRNY]

Based on my experience with Rossi, you're more likely to need them, and not much more likely to get them

[JReaper9178]

Based on my experience with Rossi, you're more likely to need them, and not much more likely to get them

Yea your probably are right🖒

[jonp]

The thing is with the hand rifle , what about parts , I have run into this before with the ruger old army revolver

https://www.gunpartscorp.com/gun-man...andi-rifle-sb2

Parts can still be found if you look around hard enough although I wish I'd have ordered several of everything before they went out of business

[JReaper9178]

https://www.gunpartscorp.com/gun-man...andi-rifle-sb2

Parts can still be found if you look around hard enough although I wish I'd have ordered several of everything before they went out of business

If I have a gun, I like to shoot it, so eventually something will ennevitable will break some way or another

[Buckshot Bill]

yes it can be done I have had two of them, they shoot great but recoil is quite stiff. and that's coming from someone who is not recoil sensitive. Is yours wood or synthetic?

[JReaper9178]

yes it can be done I have had two of them, they shoot great but recoil is quite stiff. and that's coming from someone who is not recoil sensitive. Is yours wood or synthetic?

Synthetic