Kinetic Bullet Pullers

[mdhillbilly1]

I'm looking to buy a kinetic bullet puller. Which one are you using and what do you like or dislike about it? My RCBS collet puller works great on rifle ammo or on longer bullets but not so well on the shorter pistol bullets. Thanks

https://www.quineticscorp.com

I suggest that you go to their website. I would download the instructions for each product, as you might purchase more than one. They also sell parts that insert into other companies units to convert to their design.

Sent from my LG-H830 using Tapatalk

[Ranger 7]

Have used the "Quinetics" bullet puller for 20 years, works perfectly.
All in one collet. No need to dismantle, just twist, shake and insert next round.

[Snow ninja]

I have a Frankford arsenal one that works perfectly fine. No issues as of yet. I just smack it on a piece of 2x4.

[lightman]

Thanks again for the replys. Like I said, I have an RCBS collet puller with most all of the different size collets and it works great on rifle bullets or longer pistol bullets. But not so well on short stubby pistol bullets. I also have pulled many a bullet by putting the cartridge in my press, raising it up through the die opening and grabbing it with my linemans pliers. This kinetic puller will be for the bullets that either won't work with my collet puller or that are too short to reach through the top of the press.

I ordered the RCBS kinetic puller and it should arrive today.

[dhenry132]

Buy any name brand and beat it till it breaks then buy another one

[mdhillbilly1]

Buy any name brand and beat it till it breaks then buy another one

I wanted to share this website about a new designed bullet remover by Quinetics Corporation.
I love the other ideas they sell.

https://www.quineticscorp.com/

Sent from my LG-H830 using Tapatalk

[lightman]

Well, the RCBS came in one day last week and I got a chance to use it today. The 30 Carbine, 380 and 9MM cases had a tendency to slip through the collet, but they worked. Rimmed cases worked even better. I would not want to pull a large number of bullets with this method, but for limited use I consider it money well spent.

[brassrat]

I broke two RCBS and aint paying to return their junk hammers. My new FA seems good and I just beefed it up.

[HP9MM]

Let it rebound without holding it tight. I did a death grip on 35 9MM Luger rounds and had 3 weeks of the worst tennis elbow!

[TCFAN]

I broke my RCBS after many years of use. I boxed it up and sent it back with a letter saying that if it was not covered by their life time warranty just throw it in the trash. About 1 week after mailing it back I got a new one in the mail.